Related Manuals for Igloo JUMBO
Summary of Contents for Igloo JUMBO
- Page 1 Refrigerated case JUMBO DEVICE SERIES ASSEMBLY INSTRUCTIONS 25.07.2019 Address: Tel.: +48 14/662 19 10 e-mail: info@igloo.pl Stary Wiśnicz 289 fax: +48 14/662 19 12 www.igloo.pl 32-720 Nowy Wiśnicz, Poland...
-
Page 2: Table Of Contents
KEY: First issue A, B, ... Version index Chapter No as per the Documentation No IGLOO Stary Wiśnicz 289, 32-720 Nowy Wiśnicz, Tel. 14 662 19 10 / Fax: 14 662 19 12 info@igloo.pl / www.igloo.pl... -
Page 3: Device Series Assembly Instructions Version
Allen wrench no 4 Screwdriver 2 level lines, long one 2 m and short one - approx. 0.5 m IGLOO Stary Wiśnicz 289, 32-720 Nowy Wiśnicz, Tel. 14 662 19 10 / Fax: 14 662 19 12 info@igloo.pl / www.igloo.pl... -
Page 4: Preparation Of Devices For Assembly In Series 2
ATTENTION! Imprecise seals cause that the device does not remain leakproof during operation! Making seals delivered with devices IGLOO Stary Wiśnicz 289, 32-720 Nowy Wiśnicz, Tel. 14 662 19 10 / Fax: 14 662 19 12 info@igloo.pl / www.igloo.pl... -
Page 5: Setting Of Devices So That All Assembly Holes Are In Common Axes 3
Setting of devices so that all assembly holes Setting combined modules (single units) are in common axes Move modules to each other at approx. 5 mm IGLOO Stary Wiśnicz 289, 32-720 Nowy Wiśnicz, Tel. 14 662 19 10 / Fax: 14 662 19 12 info@igloo.pl / www.igloo.pl... -
Page 6: Connecting Devices With Each Other Via Delivered Fasteners 4
Connecting devices with each other Connecting devices with each other via delivered fasteners via delivered fasteners IGLOO Stary Wiśnicz 289, 32-720 Nowy Wiśnicz, Tel. 14 662 19 10 / Fax: 14 662 19 12 info@igloo.pl / www.igloo.pl... -
Page 7: Levelling Of Device Set Via Level Lines 5
• Adjust every module via level line at places shown in fig. Removal working tops Removal of insulation under working top IGLOO Stary Wiśnicz 289, 32-720 Nowy Wiśnicz, Tel. 14 662 19 10 / Fax: 14 662 19 12 info@igloo.pl / www.igloo.pl... -
Page 8: Connecting Devices With Each Other Via Delivered Fasteners 6
Connecting devices with each other Putting insulation under working top via delivered fasteners Placing tops on device set Sealing of tops IGLOO Stary Wiśnicz 289, 32-720 Nowy Wiśnicz, Tel. 14 662 19 10 / Fax: 14 662 19 12 info@igloo.pl / www.igloo.pl... -
Page 9: Making Sealing On Module Connections 7
[detail 29] and shelf 305 of the next module • 32 [detail 30] Arrangement of device shelves IGLOO Stary Wiśnicz 289, 32-720 Nowy Wiśnicz, Tel. 14 662 19 10 / Fax: 14 662 19 12 info@igloo.pl / www.igloo.pl... -
Page 10: Assembly Of Partitions (If Any) 8
1. Night cover 2. Night cover lower (shorter) - upper (longer) – assembled as first one assembles as second IGLOO Stary Wiśnicz 289, 32-720 Nowy Wiśnicz, Tel. 14 662 19 10 / Fax: 14 662 19 12 info@igloo.pl / www.igloo.pl... -
Page 11: After Assembling The Devices In Series Before The Startup, Connect All Connectors Be
Connecting devices to the cooling and the startup, connect electrical systems - by authorized persons all connectors between modules appointed by the recipient IGLOO Stary Wiśnicz 289, 32-720 Nowy Wiśnicz, Tel. 14 662 19 10 / Fax: 14 662 19 12 info@igloo.pl / www.igloo.pl... - Page 12 Issue - July 2019 Address: Tel.: +48 14/662 19 10 e-mail: info@igloo.pl Stary Wiśnicz 289 fax: +48 14/662 19 12 www.igloo.pl 32-720 Nowy Wiśnicz, Poland...
Need help?
Do you have a question about the JUMBO and is the answer not in the manual?
Questions and answers