BIG ASS FANS TURBO6 Maintenance

BIG ASS FANS
Please take a few moments each year to perform the following preventative maintenance
procedures on your fan to ensure its safe and efficient operation. If you have questions, require
assistance, or need replacement parts, please contact us at 1-877-244-3267.
☑ CHECK SAFETY CABLE
Check that the safety cable is properly installed by removing the canopy screws, sliding the
canopy down the downrod, and examining the safety cable and hardware.
☑ CHECK HARDWARE
Make sure the mounting hardware and the screws securing the airfoils to the fan hub are
securely fastened. Tighten the six recessed hex/Allen screws on the bottom of the fan according
to the numbered sequence. When finished, repeat the tightening sequence.
☑ CHECK WIRING
Make sure the wire connectors are secure and the ground wires are securely connected.
☑ CLEAN AIRFOILS
Dust the airfoils regularly. If the fan becomes dirty, clean it with a soft cloth. Do not use solvents,
gasoline, or any other chemical cleaners. These may cause surface distortion and damage to the
fan.
© 2024 Delta T LLC dba Big Ass Fans. All rights reserved. | TRB-MISC-163-ENG-01 REV. A | 06/14/2024
TURBO6 FAN MAINTENANCE
®
USA CANADA
BIGASSFANS.COM BIGASSFANS.COM/CA
877-244-3267 844-924-4277
Need more help?
Visit bigassfans.com/support
or call us at 877-244-3267
AUSTRALIA SINGAPORE
BIGASSFANS.COM/AU BIGASSFANS.COM/SG
1300 244 277 65 6709 8500