Chapter 2 Installing And Securing The Smart Board Interactive Whiteboard; Environmental Requirements - Smart Technologies SMART Board 800 Series User Manual

Chapter 2 Installing and securing the
SMART Board interactive whiteboard

Environmental requirements

Installing the SMART Board interactive whiteboard
Installation tips
Replacing an existing interactive whiteboard on drywall
Securing the pen tray to the interactive whiteboard
Securing the pen tray to the brackets
Environmental requirements
Before installing the interactive whiteboard, review the following environmental requirements.
Environmental
requirement
Operating temperature
Storage temperature
Humidity
Water and fluid
resistance
Dust
Conducted and
radiated emissions
docs.smarttech.com/kb/144817
Parameter
41°F to 95°F (5°C to 35°C)
-40°F to 120°F (-40°C to 50°C)
5% to 80% relative humidity, non-condensing
Intended for indoor use only. Doesn't meet any salt-spray or water
l
ingress requirements.
Don't pour or spray liquids directly onto the interactive whiteboard or
l
any of its sub-components. These liquids might get into areas where
they could damage sensitive electronic components. Refer to Keeping
the writing surface clean on page 44 for detailed instructions on
cleaning the interactive whiteboard.
Moderate dust. Intended for use in office and classroom environments.
l
Not for industrial use where heavy dust and pollutants can cause
malfunctions or impaired operation.
Designed for pollution degree 1 (P1) as per EN61558-1, which is defined
l
as "No pollution or only dry non-conductive pollution."
EN55022/CISPR 22, Class A
14
15
15
16
16
17
14