Technical Specifications - Beko BDFN26640WC Manual

Notes for survey establishments:
Data required for performance
testing can be provided upon
request. Requests can be sent to the
following address:
dishwasher@standardloading.com
Do not forget to indicate the code, stock
and serial numbers of the product to be
tested in your email, as well as your contact
details. Product code, stock and serial
numbers are provided on the label affixed
to the side of the door. Compliance with
standards and test data / EC declaration
of conformity
The stages of design,
production and sale of this
product are in compliance with
the safety rules of all European Union
regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC
60436 / EN 60436
You can find the model
information as it is registered in
the product database on the
following website by searching for
your model identifier (*) found on
the energy label.
https://eprel.ec.europa.eu/
XXXXXXXXXX (*)

Technical specifications

Maximum washing capacity (check
the energy label and the table of
program data and average
consumption values in the quick
guide.)
Height (check installation document
for installation)
Width: 60
Depth: 57
Power input: 220-240V,50Hz
*
Total power 1800-2100W*
Thermal power: 1,800 W*
Total current: 10A*
Pump power: 90 - 125 W *
Drain pump power: 30 W *
* For detailed electrical values see
plate
signage on the door of the machine.
Water pressure 0.3 -10 bar (= 3 –
100 N/cm² = 0.03-1.0 Mpa)
Technical specifications are
subject to change without notice,
for the purpose of improving
product quality.
The diagrams presented in this
manual are indicative and may not
correspond exactly to your product.
The values presented on the product
labels or in the documentation supplied
with the product, have been obtained in
the laboratory by applying the
corresponding standards. These values
may vary depending on usage and
environmental conditions of the product.