Cleaning The Spray Arms; Lower Spray Arm; Upper Spray Arm - Beko BDFN26640WC Manual

Cleaning the spray arms

Clean the spray arms at least once a
week to keep the device working
properly.

Lower spray arm

Check whether the holes in the lower
spray arm (1) are blocked. If they
are, remove the spray arm to clean
it. You can lift the lower spray arm to
remove it. (varies by model)
Check if the holes in the lower spray
arm assembly are clogged. If they are,
remove and clean the spray arm
assembly (varies by model)
VS
To remove and clean the lower wash
arm assembly, hold the points (C) shown
in the figure with one hand and pull
upwards to remove. After
cleaning, follow these steps in reverse
order to reinstall the assembly
Do not attempt to rotate the spray
arm by holding it by its ends.
Attempting to rotate the ends may
cause the gear system within the
spray arm to break.
Upper wash arm
Check whether the holes in the upper
spray arm (1) are blocked. If they are,
remove the arm to clean it. Turn its nut
to the left to remove the upper spray
arm. Make sure the nut is tight when
installing the upper spray arm.
41/EN