Related Manuals for Beko DVN06431W
Summary of Contents for Beko DVN06431W
- Page 1 Dishwasher User’s Manual DVN ... DSN ... DFN ... 15 8821 0100_AB_BEKO_A6_EN/ 15-10-20.(14:48)
- Page 2 Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
-
Page 3: Table Of Contents
CONTENTS 1 INSTRUCTIONS FOR SAFETY Lower basket multipurpose / height adjustable service rack ..... 25 AND ENVIRONMENT Lower basket bottle wire ....26 General safety ........4 Upper basket height adjustable rack 26 Intended use ..........4 Upper basket multipurpose service Children’s safety ........5 rack ............ -
Page 4: Instructions For Safety And Environment
instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug. -
Page 5: Children's Safety
instructions for safety and environment Children’s safety This appliance is intended • to be used in household and Electrical products are • similar applications such as: dangerous for the children. - Staff kitchen areas in shops, Keep children away from the offices and other working product when it is in use. -
Page 6: Compliance With Weee Directive And Disposing Of The Waste Product
instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured water supply connections. from recyclable materials in accordance with our National 3. Drain the remaining water in Environment Regulations. -
Page 7: Dishwasher Overview
Dishwasher Overview 1. Upper basket 2. Upper impeller 3. Lower impeller 4. Silverware basket (depends on model) 5. Door 6. Rating Label 7. Control panel 8. Detergent dispenser 9. Lower basket 10. Filters 11. Salt reservoir lid 12. Upper basket rail 13. -
Page 8: Fan Drying System
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label) -
Page 9: Installation
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be... -
Page 10: Connection To The Drain
Installation Permitted water temperature: For your safety, close the water up to 25°C ( 60°C for products inlet tap completely after the equipped with Aquasafe+; please washing programme is over. refer toAquasafe+ section ) The dishwasher may not be connected to Connection to the drain open warm water devices or flow-through Water discharge hose can directly be... -
Page 11: Aquasafe
Installation Aquasafe+ liable for any damages that will arise when the product is used without grounding in (depends on model) accordance with the local regulations. The Aquasafe+ system protects against Connection must comply with national • water leaks that may occur at the hose regulations. - Page 12 Installation perform first operation in the shortest programme with detergent while the machine is empty. During the initial use, fill the salt reservoir with 1 litre of water prior to filling it with salt. There might be a small amount of water left in the product after factory quality control tests.
-
Page 13: Preparation Tips For Energy Saving
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy- Washing, rinsing and drying performance efficient manner. of your dishwasher will improve when Wipe away any coarse food remnants on the water softening system is adjusted the dishes before putting them in the correctly. - Page 14 Installation Make the necessary Unpack the test Dip in the test strip Take out the strip Wait for 1 minute. Open the tap and adjustment strip. into the water for 1 from the water and let the water flow for according to the test second.
- Page 15 Installation After detecting the water hardness: Perform the same hardness level adjustment that you have set on the control panel also with the regeneration adjustment switch. For example, if you have adjusted to “3” in the control panel, also set the regeneration adjustment switch to 3. Regeneration Adjustment Switch Level 0 Level 1...
-
Page 16: Adding Salt
Preparation Adding salt 3. Add 1 litre of water to salt reservoir of your machine only in initial use. Water softening system needs to be 4. Fill the salt reservoir with salt by regenerated in order for the product using the salt funnel (D). To speed up operates with the same performance dissolution rate of salt in water, stir it continuously. -
Page 17: Detergent
Preparation Detergent 2. Put suggested amount of powder, liquid/gel or tablet detergent in the You can use powder, liquid/gel or tablet reservoir. detergents in the machine. Inside the detergent dispenser Only use in the machine there are level markings that the detergents produced help you use appropriate particularly for use with... -
Page 18: Tablet Detergents
Preparation The best washing performance in dishwashers is obtained by using detergent, rinse aid and water softening salt individually. Observe the instructions of the detergent manufacturer on the package when using tablet detergents. Contact the detergent manufacturer if your dishes are wet and/or if you notice Use powder or liquid/gel limescale spots particularly on... -
Page 19: Rinse Aid
Preparation Rinse aid 4. If there are stains on tableware items after washing, level must be increased The rinse aid used in and if there is a blue trace after wiping dishwashers is a special them by hand, it must be decreased. combination that aims to This is set to position 3 as factory increase drying efficiency and... -
Page 20: Placing The Dishes Into The Dishwasher
Preparation Placing the dishes into the dishwasher You can use your dishwasher in the optimum way with respect to energy consumption and washing and drying performance only if you place the dishes in an orderly way. Wipe away any coarse food remnants •... - Page 21 Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware Dishwasher / User’s Manual 21 / 46 EN...
-
Page 22: Cutlery Basket
Preparation Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash your Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an dishes such as knife, fork, spoon, etc. in an efficient manner. -
Page 23: Collapsible Lower Basket Tines
Preparation Collapsible lower basket Bringing the tines to the tines horizontal position by holding them from the tips may cause (depends on model) them to bend. Therefore, it There are foldable tines (A) located at the will be appropriate to bring the tines in the middle to horizontal lower basket of the machine are designed or vertical position by holding... -
Page 24: Tray Wash Supports
Preparation SoftTouch Accessory (depends on model) The SoftTouch Accessory found in the lower basket of your machine enables a safe washing for your fragile glasses. Bringing the tines to the horizontal position by holding them from the tips may cause them to bend. -
Page 25: Lower Basket Multipurpose / Height Adjustable Service Rack
Preparation Lower basket multipurpose Make sure that the impeller / height adjustable service does not touch the dishes you rack placed on the racks. (depends on model) To close the racks: This accessory located at the lower basket Fold the rack (A). of your machine allows you to easily wash 2. -
Page 26: Lower Basket Bottle Wire
Preparation Lower basket bottle wire (depends on model) The bottle wire is designed for easier washing of long pieces with wide mouths. You may take out the bottle wire from the basket when not in use by pulling it out from both sides (H). - Page 27 Preparation Upper basket multi-function You may reinstall the upper basket multi- service rack function service rack on the side of your upper basket easily to use it again. (depends on model) Thanks to the upper basket multi-function service rack on the upper basket of your appliance, you may load and wash long service- ware and kitchen-ware easily.
-
Page 28: Adjusting The Height Of The Upper Basket
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B). -
Page 29: Collapsible Upper Basket Wires
Preparation Collapsible upper basket Pull the basket out completely. Place the basket back into the tracks at the wires desired height. (depends on model) Push the latches back into the correct You can use collapsible wires when you position. need a larger space for your dishes in the upper basket of your machine. -
Page 30: Ceiling Cutlery Basket
Preparation Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc. -
Page 31: Operation Of The Product
Operation of the product 3 4 5 6 7 1. On-Off / Program Selection knob 2. Rinse aid ( ) indicator 3. Low salt ( ) warning indicator Half load indicator 5. Delay indicator SelfDry Indicator 7. On/Off Control light 8. -
Page 32: Preparation Of The Machine
Operation of the product Keys On-Off / Program Selection knob When you select a program with the On- Off / Program Selection knob, On Warning control light is illuminated, and it is turned off when you bring the knob to Off position. Start / Pause / Cancel key Used for starting, holding or cancelling the selected program. - Page 33 Operation of the product Dishwasher / User’s Manual 33 / 46 EN...
-
Page 34: Auxiliary Functions
Operation of the product Auxiliary functions on the panel to activate the tablet function for appropriate programmes. Selecting Washing programmes of your dishwasher the tablet function will light the Tablet are designed to obtain the best cleaning Detergent indicator. effect, considering the type of the soil, If you have used the Tablet features soiling degree and properties of the dishes during the last washing programme... - Page 35 Operation of the product Child (Key) Lock Interior Lighting (depends on the model) (Depends on the Model) Some models have interior lighting to You may prevent other persons from illuminate the interior when the door is affecting and changing the program flow opened.
-
Page 36: Programming The Washing Period
Operation of the product Programming the Washing Machine softens the water as per the Period hardness of the mains water. The washing period may differ due to the Time Delay key water softening process. Moreover, You may delay the start time of the program program period may also change while up to 9 hours with the Delay key. -
Page 37: Setting The Rinse Aid Amount
Operation of the product Cancelling the program Setting the Rinse aid Amount Press the Start / Pause / Cancel key for 3 seconds to cancel the program. While the Program Selection Knob is “Off”, press and hold the Half Load/ 2. -
Page 38: End Of Program
Operation of the product Level of Rinse Aid program Rinse Aid Setting Indicator Amount selection knob Applies 1 dose The washing indicator on of rinse aid. the panel illuminates. Applies 2 dose The drying indicator on the of rinse aid. panel illuminates. -
Page 39: Maintenance And Cleaning
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters. -
Page 40: Cleaning The Hose Filter
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose. -
Page 41: Cleaning The Impellers
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller. -
Page 42: Troubleshooting
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •... - Page 43 Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
- Page 44 Troubleshooting the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour.
- Page 45 Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
- Page 46 Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.