Beko BDFN Series User Manual
Hide thumbs
Also See for BDFN Series:
- User manual (49 pages) ,
- Manual (47 pages) ,
- User manual (45 pages)
Related Manuals for Beko BDFN Series
Summary of Contents for Beko BDFN Series
- Page 1 Dishwasher User’s Manual BDFN... DFN... 15 8723 0100_BEKO_B7_EN/ 27-09-21.(9:32)
- Page 2 Dear Customer, Please read this user manual before using the product. Thank you for choosing this Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents before using the product.
-
Page 3: Table Of Contents
CONTENTS 1 SAFETY INSTRUCTIONS Adjusting the height of the upper basket ..27 Upper basket multi-function service rack..28 Intended Use ............. 4 Collapsible upper basket wires ......29 Safety for children, vulnerable persons and pets 4 Height setting with empty basket ..... 29 Electrical safety .......... -
Page 4: Safety Instructions
This product must be used to Safety Instructions do the domestic type dishes • This section contains safety only. instructions that will help get This product is not suitable for protected against risks of commercial or collective use. personal injury or property damage. -
Page 5: Electrical Safety
Cleaning and user Do not use extension cords, maintenance works should multi-sockets or adapters to not be performed by children operate the product. unless they are supervised by Plug must be easily someone. accessible. If this is not Keep packaging materials possible, the electrical away from children. -
Page 6: Installation Safety
squeezed or crushed while serious burns and injuries, placing the product into its and harm your furniture. location after installation or Do not install the product cleaning procedures. close to heat sources (heater, stove and etc.) or under the Installation Safety cooking area of a hob. -
Page 7: Operational Safety
at the hoses. otherwise, the product may tilt. NOTICE Connect the water inlet Maximum washing capacity hose directly to the water tap. of the product is stated in the Pressure coming from the tap section called “Technical should be 0.03 MPa (0.3 bars) Specifications”. -
Page 8: Maintenance And Cleaning Safety
Environmental Maintenance and cleaning safety Instructions Do not wash the product by Compliance with WEEE spraying or pouring water on Directive and Disposing of the Waste Product Do not use sharp or abrasive This product complies with tools to clean the product. EU WEEE Directive (2012/19/ Do not use materials such as EU). -
Page 9: Package Information
Compliance with RoHS Directive The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive. Package information Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. -
Page 10: Technical Specifications
Technical specifications Note for test institutions: Data required for performance tests shall be provided upon request. Requests can Maximum washing capacity (check the be e-mailed to the following address: energy label and Programme data and dishwasher@standardloading.com average consumption values table given Do not forget to provide the code, stock on Quick Guide. -
Page 11: Your Dishwasher
Your dishwasher Overview 1. Upper basket 2. Upper impeller 3. Lower impeller 4. Cutlery basket (depends on model) 5. Door 6. Rating Label 7. Control panel 8. Detergent dispenser 9. Lower basket 10. Filters 11. Salt reservoir lid 12. Upper basket rail 13. -
Page 12: Installation
Installation Appropriate installation location In the area where this product is Read “Safety Instructions” section first! installed, there must not be a lockable, Installation procedures must always be sliding or hinged door that will restrict performed by the manufacturer, authorised full opening of the product’s door. -
Page 13: Aquasafe
Aquasafe+ Permitted water temperature: up to 25°C ( 60°C for products equipped (depends on the model) with Aquasafe+; please refer to The Aquasafe+ system protects against Aquasafe+ section ) water leaks that may occur at the hose The dishwasher may not be connected to inlet.Water contact with the valve box of open warm water devices or flow-through the system must be avoided to prevent... -
Page 14: Connection To The Drain
Connection to the drain Electrical connection Water discharge hose can directly be Connect the product to a grounded connected to the drain hole or sink’s outlet protected by a fuse complying drainage. See the installation manual with the values in the "Technical supplied with your machine for detailed specifications"... -
Page 15: Preparation
Preparation Read “Quick Guide - Adjusting Water Softening System” before this section! The regeneration of the water softening Read “Safety Instructions” section first! system can be done in all programmes Tips for energy saving during drying step. When regeneration occurs, duration, energy and water Following information will help you use the consumption of the programme increase. -
Page 16: Adding Salt
Adding salt Water softening system needs to be regenerated in order for the product to operate with the same performance continuously. Dishwasher salt is used for this purpose. Use only special softening salts produced particularly for the dishwashers in your machine. You can put about 2 kg of softening It is recommended to use granule- or salt into the salt reservoir. - Page 17 further questions. Do not put solvents into the detergent dispenser. There is the risk of explosion! Put the detergent into the detergent dispenser just before operating the machine as illustrated below. 1. Push the latch to right to open the detergent dispenser lid (A).
-
Page 18: Tablet Detergents
Tablet detergents 3. After the empty washing cycle, review the user manual and readjust the water In addition to the conventional tablet hardness level so as to suit the water detergents, there are also commercially supply. available detergent tablets that show water 4. -
Page 19: Items Not Suitable For Washing In The Dishwasher
3. Slightly press the point (B) of the Decorative prints of chinaware as well reservoir lid to close it. as aluminium and silver items may get discoloured or tarnished after washing in the dishwasher just as it happens in handwashing as well. Some delicate glass types and crystals may become dull in time. - Page 20 Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware 20/EN...
-
Page 21: Cutlery Basket
Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash your Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an dishes such as knife, fork, spoon, etc. in an efficient manner. -
Page 22: Collapsible Lower Basket Tines
Collapsible lower basket tines Collapsible lower basket tines (depends on model) (depends on model) There are foldable tines (A) located at There are foldable tines (A) located at the lower basket of the machine are the lower basket of the machine are designed for an easier placement of large designed for an easier placement of large pieces such as pans, bowls, etc. -
Page 23: Tray Wash Supports
SoftTouch Accessory Tray Wash Supports (depends on model) (depends on model) The SoftTouch Accessory found in the Use the supports to wash trays in the lower basket of your machine enables a bottom basket. safe washing for your fragile glasses. See the Auxiliary functions section for appropriate programme and function selection. -
Page 24: Lower Basket Multipurpose / Height Adjustable Service Rack
Lower basket multipurpose / To close the racks: 1. Fold the rack (A). height adjustable service rack 2. Slide the rack up (B). (depends on model) This accessory located at the lower basket 3. Put the rack in vertical position (C). of your machine allows you to easily wash 4. -
Page 25: Lower Basket Bottle Wire
Lower basket bottle wire Upper basket multipurpose service rack (depends on model) The bottle wire is designed for easier (depends on model) washing of long pieces with wide mouths. This accessory located at the upper basket You may take out the bottle wire from the of your machine allows you to easily wash basket when not in use by pulling it out pieces such as extra long ladles and bread... -
Page 26: Bottle And Dish Holder On The Lower Basket
Bottle and Dish Holder on the Upper basket height adjustable Lower Basket rack (depends on model) (depends on model) Bottle and dish holder (A) on the lower Use the lower and upper parts of the height basket is designed to facilitate washing adjustable racks in the upper basket of dirty kitchenware with narrow openings and the machine by sliding them down or up... -
Page 27: Adjusting The Height Of The Upper Basket
Adjusting the height of the upper Repeat the same operation if the height is not adequate. basket (depends on model) Upper basket height adjustment mechanism is designed so that you can create wide spaces on the upper or lower compartment of the machine by adjusting the basket upwards or downwards either while it is empty or full. -
Page 28: Upper Basket Multi-Function Service Rack
Upper basket multi-function Tray Washing Support (depends on model) service rack You may use the tray washing supports (depends on model) if you want to wash a tray on your lower Thanks to the upper basket multi-function basket. service rack on the upper basket of your Refer to the Additional Functions section to appliance, you may load and wash long select the proper program and function. -
Page 29: Collapsible Upper Basket Wires
Collapsible upper basket wires Height setting with empty basket (depends on model) (depends on model) You can use collapsible wires when you In this model, the height setting of the need a larger space for your dishes in the upper basket may be changed using the upper basket of your machine. -
Page 30: Ceiling Cutlery Basket
Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc. -
Page 31: Operation Of The Product
Operation of the product 4. Add adequate amount of detergent in Read “Safety Instructions” section first! the detergent compartment. Read “Quick Quide” before this section. Program selection Do not touch machine screen with wet 1. Turn your machine on by pressing the hands. - Page 32 Super Rinse Function Half Load function (Depends on model) (Depends on model) Depending on the type of the detergent It is used to operate the machine without used, if a detergent dissolving issue is loading it completely. encountered it will remove the resulting 1.
- Page 33 AquaIntense Function (depends on model) AquaIntense impeller located under the lower impeller helps washing your heavily soiled dishes placed in the right side of the lower basket. It will give better results to place the most soiled dish to the right front side. Do not try to remove the AquaIntense impeller! SteamGloss Function...
- Page 34 Child (Key) Lock Function Delay function (depends on the model) (Depends on the Model) If there is an economic electricity tariff in You may prevent other persons from your area, you can use the delay function affecting and changing the program flow to wash your dishes at respective hours.
-
Page 35: Starting Of The Program
SelfDry Function 2. Move to “L:” position on the screen (depends on the model) by pressing the P2 key . Select the To enable SelfDry Function: desired position with P3 program 1. When the door is closed, to enable key. Interior illumination feature is off SelfDry function, press and in “L:0”... -
Page 36: Setting The Rinse Aid Amount
Cancelling (Resetting) the Setting the Rinse aid Amount program 1. Press the On/Off key and P2 program With the door closed, press the Start/ key simultaneously for 3 seconds and Pause/Cancel button for 3 seconds. Display enter the Settings menu after turning your machine on with On/Off key, shows 0:01 after a 3 - 2 - 1 countdown. -
Page 37: Innerclean
Water supply is cut-off warning If the mains water supply is cut off or the machine water inlet tab is not opened, water would not flow into the machine and the E:02 icon will flash on the program indicator. As long as the error continues, the washing program is stopped and it is checked whether the water flows or not into the machine at certain intervals, when... -
Page 38: Maintenance And Cleaning
Maintenance and Cleaning the filters cleaning Clean the filters at least once a week in order for the machine operates efficiently. Read “Safety Instructions” section first! Check if food residues are left on the filters. Unplug the product and turn off the If there are food residues on filters, take tap before attempting any cleaning them out and clean well under running... -
Page 39: Cleaning The Hose Filter
Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose. Check the filter and the hose regularly and clean them if necessary. -
Page 40: Cleaning The Impellers
Cleaning the impellers Do not try to rotate the impeller by Clean the impellers at least once a week in holding its ends. Trying to rotate the order for the machine operates efficiently. end sections may cause the gear system within the impeller to break. Lower impeller Upper impeller Check if the holes on the lower impeller (1) -
Page 41: Troubleshooting
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •... - Page 42 • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
- Page 43 There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes. • Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly as illustrated in section “Cleaning and Care”.
- Page 44 • Opening of the detergent dispenser lid is prevented during washing. >>> Place the dishes in a way that will not prevent the detergent dispenser lid from opening and the water going into the machine from impellers. • Detergent is stored under unsuitable conditions. >>> If you are using powder detergent, do not store the detergent package in humid places.
- Page 45 Foam forms in the machine. • Dishes are washed with hand-wash detergent by hand but not rinsed before placing them into the machine. >>> Hand-wash detergents do not contain antifoam. There is no need to hand-wash the dishes before placing them into the machine. Removing the coarse soil on the dishes under tap water, with a tissue paper or fork will be sufficient.
- Page 46 Ghid rapid Utilizarea produsului Citiți mai întâi secțiunea „Instrucțiuni de Siguranță”! 13 14 1. Buton On/Off (Pornire/Oprire) 2. Tasta Start / Pauză / Anulare 3. Butoane de selectare a funcției Intense igienăIgienă funcție Funcţia TrayWash Funcția de întârziere Fast+ Funcţia SelfDryFuncție 5. Ecran 6. Indicator de funcționare program 7. Indicator de avertizare nivel scăzut de aditiv de clătire 8. Indicator de avertizare nivel scăzut de sare 9. Tastă de selectare setări/program (Când se utilizează pentru setări, indicatorul led al tastei este dezactivat.) 10. Taste de selectare program Funcție (Tastă) Blocare Acces Copii Indicator (Tastă) Blocare Acces Copii Nu este folosit SelfDry Indicator...
- Page 48 Ghid rapid Reglarea sistemului de dedurizare a apei Performanțele de curățare, clătire și uscare a mașinii dvs. vor crește în momentul în care sistemul de dedurizare a apei este reglat corect. Pentru a regla sistemul, aflați, mai întâi, duritatea apei din regiunea dvs. și reglați conform cu indicațiile de mai jos. • Despachetaţi banda de testare. Nivelul 0 • Deschideţi robinetul şi permiteţi apei să curgă timp Nivelul 1 de aproximativ 1 minut. Nivelul 2 • Scufundaţi banda de testare în apă timp de 1 secundă. Nivelul 3 Nivelul 4 • Ridicaţi banda de testare din apă şi agitaţi-o. Nivelul 5 • Aşteptaţi timp de 1 minut. • Efectuați reglajul necesar conform cu banda de testare.strip. După stabilirea nivelului de duritate a apei: 1. Apăsați simultan tasta de pornire/oprire și tasta de program P2 timp de 3 secunde și intrați în meniul Setări după pornirea aparatului cu ajutorul tastei de pornire/oprire; în funcție de model, puteți accesa meniul Setări apăsând tasta P3 timp de 3 secunde.
- Page 49 Efectuaţi aceeaşi reglare a nivelului de duritate pe care o aveţi setată pe panoul de control de asemenea cu butonul de reglare a regenerării. De exemplu, dacă aţi ajustat funcţia la “3” în panoul de control, de asemenea setaţi şi butonul de reglare a regenerării la 3. Comutator de reglare a regenerării Nivelul 0 Nivelul 1 Nivelul 2 Nivelul 3 Nivelul 4 Nivelul 5 • Dacă nivelul de duritate al apei care o folosiţi este mai mare 50°dH, sau dacă utilizaţi apă de fântână, atunci este recomandat să utilizaţi dispozitive de filtrare şi de purificare a apei. • Dacă nivelul de duritate al apei de alimentare este mai mic de 7°dH, nu este nevoie să utilizaţi sare în maşina de spălat vase. În acest caz, lumina Indicatorului de Sare de pe panoul de comandă al mașinii dvs. de spălat vase va lumina continuu. • Dacă duritatea apei este setată la nivelul 1, Indicatorul de Sare va ilumina continuu deşi nu este necesar să fie folosită sarea. Dacă dumneavoastră utilizaţi sare în aceste condiţii, aceasta nu va fi consumată iar lampa nu va mai ilumina. Atunci când vă mutați, va trebui să setați nivelul durității apei al mașinii de spălat vase din nou, conform cu informațiile de mai sus, în funcție de nivelul durității apei din locul în care v-ați mutat.Dacă nivelul de duritate al apei al produsului dumneavoastră a fost modificat ulterior, acesta va afişa cea mai recentă modificare a nivelului de duritate a apei. 17 8510 1700-AA_BEKO_B7_RO/ 14-07-21.(15:51)