Mockett WCS3/2 Manual

WCS3/2
!
·
To reduce the risk of electric shock use only indoors.
·
If any malfunction occurs, do not attempt to disassemble or
repair.
·
Avoid placing the charger in a high temperature environment
or near fire.
· Allow enough clearance for part operation.
· Do not place metal on the wireless charging area.
· Metal objects, bank cards, digital IC cards should not be
placed between the charger and the phone to avoid damage.
·
To ensure proper performance, only use the included power
adapter with unit.
SPECIFICATIONS
·
3 ft. cord length.
· Wireless output is 10W MAX.
·
Power adapter is 1-13/32" X 1-11/16" X 2-25/32".
·
Mobile device must be equipped with a wireless charging
receiver (wireless charging accessories not included). Check
mobile manufacturer for compatibility.
1
WCS3/2
Work Surface
(Not Included)
Determine the position and location of the WCS3/2 on the
work surface. DO NOT place the unit where the cable can get
strained or trapped.
2024.07.23
WARNING
!
3-31/32"
TOP VIEW
7-5/8"
13/16"
2
Connect the power adapter to the WCS3/2. Plug the power
adapter to a nearby outlet and the unit is ready for use.
1
TABLE OF CONTENTS
. . . . . . . . . . . . 1X WCS3/2
. . . . . . . . 1X Power Adapter
FRONT VIEW
Power
Adapter