Mockett WCS3 Manual

WCS3
!
·
To reduce the risk of electric shock use only indoors.
·
If any malfunction occurs, do not attempt to disassemble or
repair.
·
Avoid placing the charger in a high temperature environment
or near fire.
· Allow enough clearance for part operation.
· Do not place metal on the wireless charging area.
· Metal objects, bank cards, digital IC cards should not be
placed between the charger and the phone to avoid damage.
·
To ensure proper performance, only use the included power
adapter with unit.
SPECIFICATIONS
· 3 ft. cord length.
· Wireless output is 10W MAX.
·
Power adapter is 1-1/16" X 1-17/32" X 1-11/16".
·
Mobile device must be equipped with a wireless charging
receiver (wireless charging accessories not included.). Check
mobile manufacturer for compatibility.
1
WCS3
Work Surface
(Not Included)
Determine the position and location of the WCS3 on the
work surface. DO NOT place the unit where the cable is
strained or trapped.
2024.03.21
WARNING
!
4-21/32"
DIA.
TOP VIEW
2
Connect the USB power cord from the WCS3 to the power
adapter. Plug the power adapter to a nearby outlet and the
unit is ready for use.
1
TABLE OF CONTENTS
. . . . . . . . . . . . 1X WCS3
. . . . . . . . 1X Power Adapter
FRONT VIEW
Power
Adapter
13/16"