Fan Operation - Haier H3SM- - annexe 5 Operation Manual

Operation

Fan Operation

Remote controller
TEMP
HEALTH FAN
SWING
MODE H.AIR.
SLEEP FRESH
CLOCK SET
TIMER
LOCK LIGHT CODE RESET
1. Unit start
Press on/off button ("
2.Select operation mode
Press MODE button. For each press, operation
mode
changes as follows:
Remote controller:
Then Select FAN operation
3.Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Remote controller:
4.Unit stop
Press on/off button("
About FAN operation
In FAN operation mode, the unit will not operate in
COOL or HEAT mode but only in FAN mode ,AUTO is
not available in FAN mode.And temp.setting is disabled.
In FAN mode,SLEEP operation is not available.
12
") on the remote controller, unit starts.
AUTO COOL DRY
LOW
HI
MED
"), the unit stops.
FAN HEAT