Cool Operation - Haier H3SM- - annexe 5 Operation Manual

Operation

Cool Operation

Remote controller
TEMP
HEALTH FAN
SWING
H.AIR.
MODE
SLEEP FRESH
SET
CLOCK
TIMER
LOCK LIGHT CODE RESET
1. Unit start
Press on/off button ("
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Then Select COOL operation
3.Select temp.setting
Press TEMP. button
Every time the button is pressed, temp.setting
o
increase 1 C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
o
decrease 1 C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
4.Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Remote controller:
Air conditioner is running under displayed fan speed.
When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room
temperature.
5.Unit stop
Press on/off button (" "), the unit stops.
10
") on the remote controller, unit starts.
AUTO COOL DRY
LOW
MED HI
FAN HEAT
AUTO