Midea MRB19B5AST User Manual page 9

11. Install the hinge cover on the left side of the refrigerator and the hole cover on the right
side.
ATTENTION
The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor.
Handle installation(Optional)
The appliance must be unplugged before
installing the handle.
1. Take 2 screws and install them in the pre-
drilled door holes, be sure to turn them
until they cannot be further tightened.
2. Position the handle over the screws.
3. Put the other set of handle screws in the
hole on the side of the handle and turn
until they are fully tightened.
1
2
1
2
09
3
3