Remote Channels - Yamaha 02R96 Owner's Manual

Studio manager owner's manual

Hide thumbs Also See for 02R96:

Table of Contents

Chapter 3—Selected Channel Window

INSERT section

This section contains the Insert parameters for the Stereo Out. The INSERT button turns

the Insert on and off. The OUT and IN parameters are used to specify the insert out desti-

nation and insert in source respectively. The POSITION parameter is used to specify the

position of the Insert in the signal path.

FADER GROUP & MUTE GROUP section

This section contains the Fader and Mute group functions for the Stereo Out. Use the

FADER GROUP buttons to add the Stereo Out to Fader groups, and use the MUTE

GROUP buttons to add it to Mute groups.

Remote Channels

This is the Selected Channel window for the

Remote Channels.

CHANNEL SELECT section

Channels can be selected by clicking the

Channel ID and choosing from the list that

appears, or by clicking the left and right

Channel Select buttons. The long channel

name is displayed below the Channel ID.

Remote Channel Level section

This section contains the ON button and the

channel fader for the currently selected

Remote Channel.

Note: When the remote target setting on the

02R96 is set to anything other than User

Deﬁned, the ON buttons and channel faders

have no effect, and the name of the speciﬁed

target is displayed below the channel ID.

Studio Manager for 02R96—Owner's Manual

Table of Contents