Main Level And Keyboard Settings - Xils lab PolyKB III User Manual

Modulations Version 2
Please consult our 9.1.3 section at the end of this manual to get more detailed information about
compatibility modes.
6.1.7

Main level and keyboard settings

OUTPUTS: The knob Outputs beneath the arpeggiator section controls the general output level of the
PolyKB,
SPACX ON: This switch enables or disables the SPACE XY voice spacing effect (see below).
BENDER: set the amount of the pitch bend in semi-tone.
[GLIDE] : Select Glide (continuous) or Glissendo (by semi-tone) and set the Polyphonic glide (each
voice is independent for a huge glide effect.
VELOCITY: set the level of the velocity used by the Main Matrix Modulation section.
AFTER: Set the level of the polyphonic after touch used by the modulation section.
DRIFT: Each voice gets differences in their settings depending to this knob: Turn left, all the voices are
set with the same values. Turned right, the voices are set with a random noise, emulating what we might
find in an analogue synthesizer where voices are built with different components.
Modulations Version 1
Other Keyboard settings located
in the ARP/KEYB panel