Important Information - Maco MULTI-MATIC Assembly Instructions Manual

Important Information

Target group
This documentation is intended exclusively for specialist companies and certified specialists (e.g. carpenter,
metalworker for construction technology, window and glass façade builder).
Electrical work may only be carried out by a qualified electrician according to DIN VDE 1000-10!
Instructions for use
› Unless otherwise indicated, measurements are made in millimetres.
› Mount all hardware parts professionally as described in this manual and observe all safety instructions!
› All diagrams are only symbolic.
› Further technical documents can be found in our online catalogue (TOM) at extranet.maco.eu
› This print document is constantly being revised and is available for download in the current
› version at www.maco.eu.
› Printing errors, mistakes and changes are reserved.
› Please send feedback or suggestions and ideas for improvements on our instructions by email to:
feedback@maco.eu.
Material notes
› The hardware parts described in this guide are made of stainless steel or galvanised passivated steel and
sealed in accordance with DIN EN 12329. They must not be used in environments with aggressive, corrosive
air content.
› Do not use acid-curing sealants, as these can lead to corrosion of the hardware parts.
› The door lock elements may only be surface-treated before the hardware is installed. Any subsequent
surface treatment may restrict the functionality of the hardware. In this case, no warranty claims can be
made against the hardware manufacturer.
5