Extended Functionality That Can Be Configured As Needed (Advanced Setup Menu); Displaying/Setting The Advanced Setup Menu; Avoiding Crossing Remote Control Signals When Using Multiple Yamaha Receivers; Initializing Various Settings For This Unit - Yamaha RX-V371BL Owner's Manual

Extended functionality that can be configured as needed (Advanced Setup menu)

TRANSMIT
RECEIVER
SLEEP
The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows.
HDMI
2 3
A A AV
2 3 Displaying/Setting the Advanced
AUDIO
1
Setup menu
V-A V V UX DOCK
TUNER
AM
Set this unit to the standby mode.
1
PRESET TUNING
MEMORY
ENHANCER SUR. DECODE
MUSIC STEREO
Press A while pressing and holding
2
STRAIGHT g
STRAIGHT on the front panel.
ENE
BD
TV CD RADIO
DVD
Release the keys when "ADVANCED SETUP" is
SETUP OPTION
displayed on the front panel display.
After approximately 3 seconds, the top menu items are
i
ENTER VOLUME
displayed.
RETURN
A
MUTE
PHONES
SILENT CINEMA
REMOTE ID -ID1
g
SCENE
i
Cursor D
3 Use PROGRAM to select the item to be set
from the following items.
In the Advanced Setup menu, you can set the following
settings.
REMOTE ID
INIT
STRAIGHT
YPAO MIC
INFO MEMORY PRESET FM AM
SCENE
BD
DVD TV CD RADIO
INPUT TONE CONTROL PROGRAM STRAIGHT
PROGRAM l / h
Changes the remote control ID of a
receiver.
Initializes various settings for this unit.
4 Press STRAIGHT a few times to select the
value you wish to change.
Switch this unit to the standby mode, and
5
then switch it on again.
The settings become effective and the unit is powered
on. If initialization is selected, it will be performed
when the unit is powered on again.
Avoiding crossing remote control
signals when using multiple
Yamaha receivers
REMOTE ID -ID1
The remote control of the unit can only receive signals
from a receiver which has an identical ID (remote
control ID). When using multiple Yamaha AV receivers,
you can set each remote control with a unique remote
control ID for its corresponding receiver.
On the contrary, if you are setting the same remote
control ID for all receivers, you can use one remote
control to operate 2 receivers.
ID1 (Default)
Receives the remote control signals set in
ID1.
ID2
Receives the remote control signals set in
ID2.
SETUP
■ To change the remote control ID
• To set to ID1
i Cursor D
Press and "BD/DVD" under
for 3 seconds or longer.
• To set to ID2
i Cursor D g
Press and "TV" under SCENE
3 seconds or longer.
Initializing various settings for this
unit
INIT- CANCEL
Initializes various settings stored in this unit and sets it
back to default.
Select the items to be initialized from the following.
DSP PARAM Initializes all parameters for the sound
field programs.
ALL Resets this unit to default factory settings.
CANCEL (Default) Does not initialize.
En
g
SCENE
for
53