Getting Started - D-Link Air DWL-700AP Manual

Getting Started

Setting up a Wireless
Infrastructure Network
Please remember that D-Link Air wireless devices are pre-configured to connect
together, right out of the box, with their default settings.
For a typical wireless setup at home (as shown above), please do the following:
You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or office).
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to your broadband router (see the Quick
Installation Guide included with your router.)
Connect the router to the D-Link Air DWL-700AP.
(See the Quick Installation Guide included with the DWL-520.)
If you are connecting a desktop computer in your network, you can install the
D-Link Air DWL-520 Wireless PCI Adapter into an available PCI slot on your
desktop computer.
(See the Quick Installation Guide included with the DWL-520.)
Install the D-Link Air DWL-650 Wireless Cardbus Adapter into a laptop com-
puter.
(See the Quick Installation Guide included with the DWL-650.)
2
3
4
5
1
6
8