Using The Configuration Utility - D-Link Air DWL-700AP Manual

Using the Configuration Utility

If you wish to change the default settings or optimize the performance of the
DWL-700AP, D-Link has included a configuration utility for this purpose.
Whenever you want to configure your network or the DWL-700AP, you can access the
Configuration Utility by opening the web-browser and typing in the IP address of the
DWL-700AP. The DWL-700AP's default IP address is shown below:
!
Open the web browser
!
Type in the IP address
of the access point
(The IP address shown in the example above is the default setting. Use this IP address
when connecting to a network consisting of other D-Link devices set to their default
settings. If you have changed the IP address of the DWL-700AP to conform to a net-
work other than one with D-Link devices, then input that IP address in the web browser,
instead of the default IP address shown.)
!
Type admin in the
User name field
!
Leave the Password
blank
!
Click OK
admin
9