D-Link Air DWL-700AP Manual page 14

Using the Configuration Utility (continued)
Advanced > Mode
Access Point:
network.
Wireless Client:
network. A wireless client is a device that connects to the network through a router or an
access point.
Remote AP MAC:
700AP will connect when it is in wireless client mode.
Site Survey:
wish to connect.
Repeater:
Select this option to use the DWL-700AP to extend the reach of a remote
AP by repeating the signal.
Remote AP MAC:
range extended by the DWL-700AP.
Site Survey:
to repeat.
Select this option to use the DWL-700 AP as an access point in your
Select this option to use the DWL-700AP as a wireless client in your
Input the MAC Address of the remote AP to which the DWL-
Click the Site Survey button to select a remote AP to which you
Input the MAC Address of the remote AP that will have its
Click the Site Survey button to select a remote AP that you wish
14