Yamaha R-S700BL Owner's Manual page 46

SETTING THE OPTION MENU FOR EACH INPUT SOURCE
Output level for each input source
Choices: High*, Low
Select the function of the TRIGGER OUT jack when
the corresponding input source is selected.
High
Send the voltage signals when you select the input
source you set in "Source".
Low
Stop sending the voltage signals when you select the
input source you set in "Source".
Manual test (Manual)
Choices: High*, Low
Confirm that the component connected to the
TRIGGER OUT jack operates when voltage signals
are sent to the component. This setting is available
only when "Mode" is set to "Manual".
High
Send the voltage signals.
Low
Stop sending the voltage signals.
FM Mode
STEREO*, MONO
Choices:
Sets the FM broadcast receiving mode.
"FM Mode" is displayed in the Option menu only when
TUNER is selected as the input source.
STEREO Receives in automatic stereo mode by priority.
MONO Receives in monaural mode. You can get a
better reception in monaural mode.
Auto Preset
Automatically detects FM radio stations and registers
them as preset stations (see page 22).
"Auto Preset" is displayed in the Option menu only when
TUNER is selected as the input source.
Clr All Preset
Clears all preset stations (see page 25).
"Clr All Preset" is displayed in the Option menu only
when TUNER is selected as the input source.
Parental Lock
Sets the Parental Lock (see page 32).
"Parental Lock" is displayed in the Option menu only
when SIRIUS is selected as the input source.
42
En
Interlock
ON*, OFF
Choices:
When an iPhone/iPod is connected to this unit wirelessly
using a Wireless System for iPod, the iPhone/iPod can be
used to turn this unit on, set it to standby mode or select
DOCK as the input source.
"Interlock" is displayed in the Option menu only when
using a Wireless System for iPod and DOCK is selected as
the input source.
ON This unit responds to certain iPhone/iPod
operations.
OFF Disables this feature.
Connect/Disconnect
Connects to or disconnects from a Bluetooth component
(see page 39).
"Connect/Disconnect" is displayed in the Option menu
only when DOCK (Bluetooth) is selected as the input
source.
Pairing
Pairs the Bluetooth Wireless Audio Receiver and a
Bluetooth component (see page 38).
"Pairing" is displayed in the Option menu only when
DOCK (Bluetooth) is selected as the input source.