6. Check " CD-ROM drives" (as shown above) if you are using the USB driver included on the CD-ROM
that came with your Modem. Click Next.
7. Connect the Ethernet cable if you have not done so.
8. Connect the ADSL cable if you have not done so. Remember that most ADSL installations require a
filter to divide the ADSL signal from the Plain-Old Telephone (POTS) signal.
9. You can restart your computer now by clicking the Finish button. The computer will be able to connect
to the Modem through the USB port after restarting.
DSL-302T DSL Modem User's Guide
xiii