Table of Contents
Advertisement
System Menu
This TV set has three methods to set channels, which are respectively Automatic search, manual search
In this section, how to use the remote control to set channel is explained. You can also use
buttons on the TV set to set channel.
Channel Type
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press MENU button and then use VOL+/- button to select the SYS. Menu.
2
Press CH+/- buttons to select "Channel Type" item.
3
Press VOL+ button to select Cable or Air item.
When Air is selected, the TV will detect antenna signals and will search
for antenna TV (NTSC and ATSC) channels available in your local area.
When Cable is selected, the TV will detect cable company supplied
signals and will search for cable TV (NTSC,ATSC, QAM modulated)
channels available in your area.
Make sure that registration with your cable TV provider and connection
of equipment are completed.
When Air and Cable are selected, the TV will detect the antenna
signals and cable company supplied signals, and search for the
antenna TV and cable TV channels available in your area.
CATV Type
1
Press MENU button and then use VOL+/- button to select the SYS. Menu.
2
Press CH+/- buttons to select "CATV Type" item.
3
Press VOL+ button to select STD, IRC or HRC item.
Note
: STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system
that exists in your particular area.
Automatic Scan
1
Press MENU button and then use VOL+/- button to select the SYS. Menu.
2
Press CH+/- buttons to select "Auto Scan" item.
3
Press VOL+ button to ensure automatic search function work.
4
Press MENU button to stop automatic search function.
After the search has finished, all channels now playing
program will be automatically preset in order.
18 Plasma TV
Color Sys.
AUTO
Sound Sys.
M/N
Fine Tune
49.75MHz
Skip
Off
Channel Type
Cable
CATV Type
STD
Auto Scan
Prog. Switch
A
B
C
Note : the tuning menu will be
only operated in normal TV mode.
Color Sys.
AUTO
Sound Sys.
M/N
Fine Tune
49.75MHz
Skip
Off
Channel Type
Cable
CATV Type
STD
Auto Scan
Prog. Switch
A
B
C
fine tune.
Advertisement
Table of Contents
