Switching On/Off The Tv Set; Choose The Menu Language; Choose The Input Source - Haier HL47K Owner's Manual

Operation
In the manual, the OSD (on screen display) may be
different from your TV`s, because it is just an example to
help you with the TV operation.
There are several options you might need to set up in order
for your TV to work properly. Read the instructions that
follow.
Initial Setup: Set according to the screen display.

Switching On/Off the TV set

1 First, connect power cord correctly. .
2 Select the viewing source by using INPUT button on .
the remote control.
3 When finished using the TV, press POWER button on .
the remote control. The TV reverts to standby mode.
4 If you intend to be away on vacation, disconnect the .
power plug from the wall power outlet.
Note
If the TV in power on , the screen show information
according the type of input signal . the information will
disappear. If there is no signal , No Signal
on the screen.

Choose the Menu Language

When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
1. Choose TV Input and then press MENU button.
2. Press / button to select Function menu.
3. Press or OK button and then use
Language.
4. Press / button to select language.
English Spanish or French

Choose the Input source

Change the picture source so you can watch your TV,
VCR, DVD, Cable , or any other devices that are
connected to your TV.
1. Press INPUT button to enter the Select Source menu
and then use / button to select the desired items
(TV, Video1, Video2, S-Video,Component1, Component2,
VGA, HDMI1,HDMI2,HDMI3).
2. Press OK button to confirm .
Note
The HDMI3 option appears only with some models,
please see the object.
18 TV LCD-TFT
will display
/ button to select
Video Language
OSD Timeout
Audio
OSD Transparency
Screen Mode
Channel
Blue Screen
DPMS
Function
Time Setup
Lock
Closed Caption
Default
Function
Select Source
TV
Video1
Video2
S-Video
Component1
Component2
VGA
HDMI1
HDMI2
HDMI3
Operation
English
Short
Middle
Normal
On
On
Select EXIT Back
/