Fine Tune; Color System; Skip; Prog.switch - Haier 42EP24STV - ANNEXE 131 Owner's Manual

System Menu

Fine Tune

If the picture and/or sound are poor, try using the fine tune feature.
Do not use this feature unless reception is poor.
1
Repeat step 1-2, then press CH+/- buttons to select "Fine Tune" item.
2
Press VOL-/+ buttons repeatedly to carry out fine tune, till the best
picture and sound are obtained, then loosen the button.

Color System

Usually this should be set in the auto position. However if the color displayed
on the screen are incorrect, you can manually select the correct color system.
Press MENU and then VOL+/- button, till the picture menu shown on the
right will display on the screen.
Press CH+/- buttons to select "Color Sys.", then press the VOL-/+ buttons
to select the correct color system. In general, you can set it as "AUTO".

Skip

After the programs are presetting, you can skip some programs so that to select your favorite channels only.
1. Press CH+/- button or Direct-digit choosing button to select a channel directly.
Press MENU and then use VOL+/- button to select the SYS. Menu
2.
Press CH+/- buttons to select "Skip" item.
3.
4. press VOL-/+ button to set Skip as On.
5. When you are satisfied with your choice, press MENU button to return to
the previous menu or press EXIT button to return to TV viewing.
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the number of the channel to
be recovered.
2. Do the above steps again.
3. Press VOL+/- button to set Skip as Off.

Prog.Switch

1
.Press MENU and then use VOL+/- button to select the SYS. Menu
2
. Press CH-/+ button to select Prog.Switch.
3.
Press VOL+ to enter the submenu, and press the digital button to set the desired
channel number,
Press CH+ button to To Prog item, and Press the digital button to set the exchange
channel number, press CH+ button to Switch, then press VOL+ button to confirm.
4
. When you are satisfied with your choice, press MENU button to return to
the previous menu or press EXIT button to return to TV viewing.
Color Sys.
Sound Sys.
Fine Tune
Skip
Channel Type
CATV Type
Auto Scan
Prog. Switch
Color Sys.
Sound Sys.
Fine Tune
Skip
Channel Type
CATV Type
Auto Scan
Prog. Switch
.
Color Sys.
Sound Sys.
Fine Tune
Skip
Channel Type
CATV Type
Auto Scan
Prog. Switch
Current Prog
.
To Prog
Switch
AUTO
M/N
49.75MHz
Off
Cable
STD
A
B
C
AUTO
M/N
49.75MHz
Off
Cable
STD
A
B
C
AUTO
M/N
49.75MHz
Off
Cable
STD
A
B
C
000
001
A
B
C
Owner s Manual 19