Function Setup
Function Setup
Function Setup
It is possible to select language, OSD translucent, position and screen display of the menu as follows:
1. Press MENU button once, and the
2. Press
/
button on the remote controller to enter the menu of system setup.
3. Press
/
to select desired option on the menu.
4. Press
/
to adjust selected option.
Menu language option
Repeat step 3 and 4 to select English, Francais or Espanol as the menu language.
Menu timeout option
Repeat step 3 and 4 to select menu display time for 5,10,15, 20, 25, 30 or 40 seconds.
Menu Background Option
Repeat step 3 and 4 to select OSD background between Translucent and Opaque.
Auto Off
Repeat step 3 and 4 to select On/Off. If
be on the screen and for 3 minutes
monitor for 3 minutes without any operation ,
Close Caption
Repeat step 3 and 4 to set up Off/CC1/CC2/CC3/CC4/TX1/TX2/TX3/TX4/XDS.
(Note: Close Caption is only available in AV and S-Video signal)
/
button until the following menu appears on the screen:
On is selected
, and there is no signal to the monitor for 2 minutes ,
the monitor will be in standby condition . If Off is
Haier will be on the screen .
A
B
C
Auto Off will
selected
, and there is no signal to the
Owner s Manual 23