Page 1
LCD TV MONITOR HLH26BB HLH32BB Please read this manual carefully and completely before operating your LCD TV monitor. Retain this manual for future reference.
WARNING RISK ELECTRIC SHOOK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire.
IMPORTANT SAFETY INSTRUCTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: 1)Save these Instructions ---the safety and operating instructions should be retained for future reference. 2)All warning on the appliance and in the operating instructions should be followed. 3)Cleaning --- Unplug from the wall outlet before cleaning.
SAVE THESE INSTRUCTIONS Thank you for using our Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit.
MENU INPUT MENU INPUT MENU Button Power On/Off Button Signal source input option Power Standby Indicator illuminates red in standby mode,illuminates blue when the display is turned on Down/Up. Sel ct desired option on the menu Remote Control Sensor VOLUME Buttons 6 LCD TV Monitor...
Audio/Video Input 2 Connect audio/video output from an external device to these jacks S-Video Input VGA Input/Audio input DVI Input/Audio input connect your cable/PC through the input Power On/Off Earphone port VGA IN AV IN COMPONENT IN DVI IN AV OUT AC IN AUDIO Pr/Cr...
When using the remote control. Aim it towards the remote sensor on the LCD TV monitor. VIDEO INPUT Select AV1(S-Video)/AV2 source Displays : AV1(S-Video)/AV2/YPbPr/ YCbCr/VGA/DVI input source POWER Select PC source Turn your LCD TV monitor on VIDEO INPUT POWER AUTO Auto adjust for PC DISPLAY...
LCD TV Do not leave a still picture from a VCR on the screen for a long time. Ifthe 4:3 format is used, the fixed images on the sides of the screen may remain visible on the screen, if this format is used day after day. This is known as burn-in, it is uneven wear of the screen area.
LCD TV LCD TV and orientation Also,you could use shortcut key on the remote control) LCD TV input LCD TV input or composite(AV) and orientation S-Video Owner s Manual 11...
,if necessary. LCD TV LCD TV LCD TV LCD TV and orientation button Also,you could use shortcut key such as PC,DVI on the remote control) LCD TV LCD TV The synchronization input from horizontal and vertical frequencies are separate. Owner s Manual 13...
Turning the LCD TV monitor On Turning the LCD TV monitor On 1. Connect power cord correctly. 2. Press the ON/OFF button on the back of the LCD TV monitor . At this moment, the LCD TV monitor is switched to standby mode.
Basic Function Basic Function Saving Mode Hold Q SET button pressed on the remote for 3 seconds until Quick Set Setup menu appears on the screen. Quick Set Setup 1.Press button for desired setup option. Light Sound 2.Press button for setup option. Bright Noise Normal...
Picture mode Press P STD button on the remote control for menu display, and press button for desired mode as follows: (This change can also be made from Picture menu adjustment screen) PIC.Mode Bright Normal Soft Personal Bright Normal Soft Personal Sleep Timer Every press of SLEEP button, the timer will be set in the following sequence:...
Picture Quality Adjust Picture Quality Adjust Picture quality adjust Picture quality can be adjusted for any input separately. The picture quality on the screen can be adjusted as follows: 1. Press MENU button and until the following menu appears on the screen: AV1/S-Video/AV2 menu: YPbPr/YCbCr menu: (Not available)
Picture quality adjust DVI menu: (not available) (not available) 2.Press button to enter picture menu and to select desired option , the current item is marked yellow. 3. Press button again to adjust selected option. 4. Repeat step 2 and 3 until desired picture quality has been achieved . When displayed time for menu setup expires without any operation , the menu disappears automatically from the screen , If MENU or EXIT button is pressed , the menu on display will disappear in sequence or immediately respectively.
Sound adjustment Sound adjustment Sound adjust Sound can be adjusted for any input as follows: 1. Press MENU button and button until the following menu appears on the screen. 2. Press to enter sound setup menu, and press button again for desired option. 3.
Adjustment Setup Adjustment Setup Adjusting setup In VGA and DVI input mode , H Position and V Position can be used to adjust the picture position. When VGA DVI input mode is set 1. Press MENU button on the remote control and option of picture position adjust(ADJ).
Function Setup Function Setup Function Setup It is possible to select language, OSD translucent, position and screen display of the menu as follows: 1. Press MENU button once, and the button until the following menu appears on the screen: 2. Press button on the remote control to enter the menu of system setup.
Calendar Display and Check Repeat step 3 and press or ENTER button to enter calendar menu as follows: Enter Calendar menu, press button to adjust or check the date. Press to select the year, month or day and to adjust . Parental Designate and press or ENTER button to enter Parental submenu as follows:...
Time Setup Time Setup If Off-time or On-time is intended in AV1/S-Video/AV2/YPbPr/YCbCr/VGA/DVI , follow the instructions as below: 1.After choosing the time function from the main menu,press to select the option ,then press to select the position of the time and enter the digits to set. If Clock is set, time you set for Off Time and On Time will be a point of time.
Lock Menu Options Lock Menu Options Lock setup Press LOCK button on remote control, Password will appear on the screen. If password is correctly entered, the Lock set menu will be menu will be entered . If the password is not correctly entered , you will be required to reenter the password , press EXIT button to erase the window .
Preset Prog. PresetProg. Is opted for setting up start signal resource . Press button to select PresetProg. Press button sources can be swapped in AV1/SVideo/AV2/YPbPr/VGA/DVI/Off mode . The source you set will be entered if the LCD TV monitor is switched off and on again. Source Lock Source Lock is opted to hinder external input modes, such as AV, S -Video and VGA.
LCD TV Auto Sync Auto Sync or ENTER Auto Sync Auto Sync a better quality picture Note: It is better to use Reset instead of Auto Sync in 480P,720P,1080i, Auto try Auto Sync again. Sync . This is called burn-in. 4:3 Mode Full screen( correspond with 16:9) Full Screen...
LCD TV LCD TV LCD TV Cell Defects There may be red spots, blue spots, green spots and black spots on the screen. This is a characteristic of liquid crystal panels and is not a problem. The liquid crystal panel is built with very high precision technology giving you fine picture details. Occasionally, a few non- active pixels may appear on the screen as fixed points of red, blue, green, or black.
HLH26BB HLH32BB MODEL Dimensen(WXHXD) 31.3X20.2X11.2/794X514X285 37.0X23.4X11.2/940X595X285 Unit::inches/mm (including stand) Weight (pounds / kg) 37.77/17.1 52.92/24 Resolution 1366X768 (Pixel) 120V~ , 60Hz Power requirement NTSC Color System Color 16,770,000 (256 steps of each R, G and B) Impedance Speakers Input 2X5W...