Advanced Setup - Yamaha HTR-6150 Owner's Manual

Advanced setup

This unit has additional menus that are displayed in the
front panel display. The advanced setup menu offers
additional operations to adjust and customize the way this
unit operates. Change the initial settings (indicated in bold
under each parameter) to reflect the needs of your
listening environment.
Notes
• Only A MAIN ZONE ON/OFF, O PROGRAM l / h, and
P STRAIGHT are effective while you are using the advanced
setup menu.
• No other operations can be made while you are using the
advanced setup menu.
• The advanced setup menu is only available in the front panel
display.
Press C SYSTEM OFF to set this unit to the
1
standby mode.
Press and hold N TONE CONTROL and
2
then press A MAIN ZONE ON/OFF to turn
on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
Press O PROGRAM l / h to select the
3
parameter you want to adjust.
The name of the selected parameter appears in the
front panel display.
Press P STRAIGHT repeatedly to change
4
the selected parameter setting.
Press A MAIN ZONE ON/OFF to confirm
5
your selection and set this unit to the
standby mode.
y
The settings you made are reflected next time you turn on this
unit.
82
En
Advanced setup
■ Speaker impedance
(U.S.A. and Canada models only)
Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Choices: 8Ω MIN, 6Ω MIN
• Select "8Ω MIN" to set the speaker impedance to 8 Ω .
• Select "6Ω MIN" to set the speaker impedance to 6 Ω .
SP IMP.
8Ω MIN
6Ω MIN
■ SIRIUS Satellite Radio Parental Lock
code number reset
Use this feature to set the code number for the SIRIUS
Satellite Radio Parental Lock feature to the initial factory
setting.
Choices: RESET, CANCEL
• Select "RESET" to set the code number to the initial
factory setting.
• Select "CANCEL" to set the code number to the initial
factory setting.
Note
Even if you set "SR PIN" to "RESET", this unit does not unlock
the locked channels. The initial factory setting of the Parental
Lock code number is "0000".
■ Bi-amplifier setting
Use this feature to activate or deactivate the bi-amplifier
function (see page 12).
Choices: ON, OFF
• Select "ON" if you want to activate the bi-amplifier
function. "SUR.B L/R SP" is set to "NONE"
automatically, and this unit outputs the front channel
audio signals at the SURROUND BACK/BI-AMP
speaker terminals.
• Select "OFF" if you want to deactivate the bi-amplifier
function.
SP IMP.
Speaker Impedance level
Front (A or B)
The impedance of each
speaker must be 8 Ω or
Center
higher.
Surround
Front (A or B)
The impedance of each
speaker must be 6 Ω or
Center
higher.
Surround
SR PIN
BI-AMP