Digitrax DN147A1 Quick Start Manual

DN147A1
Fits many older Atlas N locomotives
Features:
▪
Drop in "A1" Atlas light board replacement decoder. Allows decoder to be
moved between different locomotives with typically no soldering.
▪
Series 7 Enhanced Decoder Features.
▪
Series7 decoder firmware may be user updated using a Digitrax USB
equipped Command Station with Sound Loader software or equivalent in
decoder IPL mode.
▪
4 Digitrax FX 3 Functions-Control lights and functions for prototypical light-
ing effects and on/off control.
▪
Configurable FX 3 Pulse Function available on all function outputs.
▪
Digitrax LocoMotion
▪
2 Digit and 4 Digit Addressing.
▪
Basic, Advanced & UniVersal Consisting.
▪
SuperSonic motor drive for quiet operation.
▪
Direct and Operations Mode programming.
▪
Program CVs with Digitrax Command Control, or compatible DCC system.
▪
Decoder Factory Reset by writing CV8, with or without speed table reset.
▪
Transponder Equipped ready for transponding ID on your layout.
▪
Power-on Motor Isolation Protection, helps prevent damage to your decoder.
▪
DCC Compatible.
▪
FCC Part 15, Class B RFI compliant.
▪
Operates on DCC track voltage 9V minimum. to 22V maximum.
Parts List:
1 DN147A1 compact 1 amp Atlas light board decoder
1 Instruction Sheet
CAUTION: This "A1" form factor decoder fits some old-
er legacy Atlas locomotives. More recent versions of the
same shell/locomotive type may require a different de-
coder. Check before purchasing this version.
Installation Instructions:
information and technical updates. Refer to Figure 1 for the decoder
layout.
© 2024 Digitrax, Inc.
Complete Train Control
Run Your Trains, Not Your Track!
System – Lets your trains run like the real thing!
®
Visit www.digitrax.com for the latest
— 1 —
N Scale
Mobile Decoder
1.0 Amp/2 Amps Peak
4 FX 3 Functions, 200ma output
www.digitrax.com