9g turnout or motion control servo, with mount bracket and installation hardware (2 pages)
Summary of Contents for Digitrax UT4D
Page 1
Run Your Trains, Not Your Track! UT4D Duplex Equipped Radio Utility Throttle User Manual The UT4D is a low cost, simple-to-operate duplex equipped radio throttle: Duplex Equipped Radio operation with UR92 Duplex transceiver InfraRed operation with UR90, UR91 or UR92 Supports 2 &...
5 times. The UT4D then will attempt to select the Loco address on the 4 rotary address selectors. 5. If the UT4D’s Status light blinks red 5 times this means that no UR92 with the Group Name is within range. You may need to move closer to the UR92 for the Duplex group to re-join the Group or you can simply plug in to LocoNet to join another Duplex Group that is available.
Page 4
Dispatched loco address. IR Mode: (not plugged in) 1. Be sure the UT4D Infrared emitters are pointed at a UR panel. Change the rotary address selectors to a different address. The Status light will change to blinking red to show the loco address is released.
Page 5
Orange and the UT4D will control only the functions of the loco. You will not have throttle, forward/reverse direction or brake control of the consist. This is normal. The UT4D is not designed to make up or break up consists, but can control functions of individual consist members.
Page 6
, either green or red, of about once per second will slow down to once every 3 seconds to show the UT4D is conserving battery power. Any user action will exit this mode automatically and the Status light will return to the faster blink rate.
Page 8
UT4D Duplex Equipped Radio Utility Throttle Super Super Available Computer Interface Computer Interface Decoder Programmer Decoder Programmer Sound Programmer Sound Programmer 2443 Transmitter RD Panama City, FL USA 32404-3157 www.digitrax.com Made in U.S.A. 850-872-9890 850-872-9557...
Need help?
Do you have a question about the UT4D and is the answer not in the manual?
Questions and answers