Tuning The Television - Beko 17WLB450S Operating Instructions Manual

Press the Mute button again to restore
the sound. The symbol will disappear.
Pressing Volume up button will also
restore the sound.
But pressing the Volume down
button will decrease the volume
without restoring.
PP
Personal preference. Press the PP
button to revert to the default settings
for the TV . (See TV setup).
Swap
Press swap button to recall the last
programme you watched.
Your TV has 2 scarts so each time you
press your AV button, your input will
AV
change as follows:
1 AV1 when using SCART socket 1
(RGB support).
2 AV2 when using SCART socket 2.
3 AV3 when using the phono sockets
of the TV.
4 AVS when using the S-video socket.
Press the AV button again to return
AV
to TV mode.

Tuning the television

There are two ways of tuning your television:
Manual, where you control the tuning process
or Autoprogram where the television does it
all automatically.
This function will automatically tune name and
arrange programs found in the followıng order.
PROGRAM NO
1 BBC1
2 BBC2
3 ITV
4 CHANNEL 4
5 CHANNEL 5
Please Note
If the TV is set to a channel with no signal the
TV will return to standby in 5 minutes.
The last minute remaining is displayed on
the screen.
Automatic tuning (Autoprogram)
There are two ways to access the SETUP
menu:
Press the blue Setup button. Or Press
the Menu button and use the Program
down button to select SETUP . Press the
OK button to enter the SETUP menu.
OK
MAIN MENU
SOUND
PICTURE
PROGRAM TABLE
SETUP
FEATURE
SETUP
CHANNEL
SYSTEM I
SEARCH
FINE TUNE
PROGRAM NUMBER
AUTO PROGRAM
STORE
-11-