Installing The Handle; Reversing The Door Of Your Wine Cooler - Temptech OZ60DB-24 User Manual

„ Installing The Handle
o Remove the door Gasket slightly to expose the two screw holes.
o Fix the Handle by screwing the two Handle Screws tightly, the Handle
Screws with Washers are pre-installed inside the screw holes, pls.do not
unscrew the Handle Screws too much in case the Washers fell off to the
bottom of door frame.
o Replace the Gasket.
„ Reversing The Door Of Your Wine Cooler
The following operations are available for a model with
control in cabinet only and with Right Door Hinge installed.
Any parts and screws that you remove from the appliance
whilst reversing the door, should be retained for later use.
Gasket
Handle
Washer
Handle Screws
.20.