Power On/ Off And Standby; The Interior Light - Temptech OZ60DB-24 User Manual

o When the digital
once, the set temperature will be decreased by 1°C/1°F with a sound of
beep.
o When the digital shows the desired temperature, leave all buttons no
touching about 5 seconds, your setting will be saved with a sound of
beep, the digital
inside of the cabinet .
„ Power On/ Off And Standby
o The appliance will be turned on automatically when it is plugged;
o The appliance will not be turned off unless to unplug it;
o To stop all functions, press the power button for 3 seconds whatever the
control panel is locked or unlocked, a beep will sound, the appliance will
be on standby condition;
o During the standby condition, the button
each 2 seconds;
o To restart all functions, press the power button for 3 seconds again
whatever the control panel is locked or unlocked, a beep will sound.
„ The Interior Light
o The Interior Light can be turned on/off gradually alone by pressing the
Light button
o The Interior Light can be turned on/off gradually alone by pressing the
Light button
„ Switch C/
O
o The appliance is with two temperature scales:
(Fahrenheit) to indicate temperature, the default is
o To switch C to
O
o Press the temp.plus and minus button
the mark will light on on the display window, the mark
at the same time;
o Your setting will be saved as new default temperature scale unless to re-
set it.
is flashing, press the Temperature Minus Button
will not flash and start to show the set temperature
whatever the control panel is locked or unlocked;
whatever the door is open or close;
F
O
F, make sure the control panel is under locked condition;
O
will light on and flash once
together for 3 seconds,
+
.10.
C (Celsius) and
O
C (Celsius).
O
will light off
F
O