Table of Contents
Advertisement
Available languages
Available languages
Specifications
Product Name
Network Attached Storage
Operating System
UGOS Pro
Processor
Intel 8505 5-Core
Max Turbo Frequency
4.40GHz
Memory Types
SODIMM DDR5
Memory Capacity
8GB/64GB (max memory size)
System Storage
SSD 128GB
Internal: ext4/Btrfs
External: Btrfs/ext2/ext3/ext4/VFAT/exFAT/FAT16/FAT32/NTFS/XFS
File System
Internal non-"UGREEN NAS" storage pool:
Btrfs/ext2/ext3/ext4/VFAT/exFAT/FAT16/FAT32/NTFS/XFS
Storage Mode
JBOD/Basic/RAID 0/RAID 1/RAID 5/RAID 6/RAID 10
4×2.5-inch/3.5-inch SATA hard drive
Supported Drive
2×M.2 NVMe 2280 SSD
Video Port
1×HDMI, Up to 4K
1×2.5GbE
Support 10Mbps/100Mbps/1000Mbps/2.5Gbps auto-negotiation
RJ45 Ethernet Port
1×10GbE
Supports 10M/100M/1000M/2.5Gbps/5Gbps/10Gbps auto-negotiation
1×USB 3.2 Gen 2, supports theoretical transfer rate of up to 10Gbps
1×Type-C USB 3.2 Gen 2, supports theoretical transfer rate of up to 10Gbps
USB Port
1×USB 3.2 Gen 1, supports theoretical transfer rate of up to 5Gbps
2×USB 2.0, supports theoretical transfer rate of up to 480Mbps
SD Card Slots
1×SD 3.0, supports theoretical transfer rate of up to 104MB/s
Power Source Specification
DC 19V/7.9A
Phone: Android 7.0/iOS 15 or later
Compatible Systems
Computer: Windows 7 SP2 or later/macOS High Sierra 10.13.6 or later
Working Environment
Temperature: 0℃~40℃/32℉~104℉
Product Dimensions
L257.5×W178×H178 (mm)/L10.1×W7.0×H7.0 (inch)
Humidity: 5% to 95%
21
Advertisement
Table of Contents
Need help?
Do you have a question about the NASync DXP4800 Plus and is the answer not in the manual?
Questions and answers
When away from my desktop and out of range of my WIFI, how do I reconnect my mobile device to my UGreen DXP4800 Plus Server? Can I access it via Cellular instead of WIFI? All my devices work great under the control of my WIFI but when I'm remote I can't get access using my mobile device...
You can reconnect your mobile device to the UGREEN NASync DXP4800 Plus server remotely by enabling remote access. The NAS provides remote access to files from anywhere in the world. To do this, go to the control panel, navigate to device connection settings, and enable remote access.
Yes, you can access the NAS via cellular data instead of Wi-Fi, as long as remote access is enabled and the NAS is connected to the internet. However, enabling remote access comes with security risks, so proceed with caution.
This answer is automatically generated
I notice there are two Modes - Mode 1 UGreenlink remote access (It is checked)... Do I need Mode 2 to be enabled? And if so, how do I configure it?
How can I set up local access on my DXP4800 Plus?