Table of Contents
Advertisement
Available languages
Available languages
Indicator
LED
Color
White
Flashing (once per 0.5s)
Power
Indicator
Orange
Slow flashing (once per 1s)
Orange
Slow flashing (once per 1s)
DISK 1-4
Hard Drive
Indicator
White
Orange
LAN
Network
Indicator
White
Buzzer
Status
Power on
System reset
Drive error
System error
13
Status
Description
Static
Power on
Power off
Pulsing
System hibernation
Device error
Drive error
Flashing
Drive active
Pulsing
Drive hibernation
Static
Internet not connected
Flashing
Data transfer (No Internet)
Static
Internet connected
Flashing
Data transfer (Internet connected)
Beeper
Short beep once
Short beep once
Beep once at 3-second intervals
Beep once at 2-second intervals
Web Client—Binding & Settings
Step 1: Add Device
① Please ensure that the NAS device and computer are on the same local area network (LAN),
then visit the URL: find.ugnas.com.
② The system will automatically search the devices in your current LAN.
③ Select the device you want to add and click "Connect".
Step 2: Initialize the Device
① After adding the device, you will enter the initialization settings interface.
② In this interface, please complete the following operations:
· Name the device: Name your device to ensure it's easy to identify and manage.
· Create a local administrator account: Register a local administrator account for the device to
manage the device.
· Register and bind UGREEN Cloud account (optional): If you want to use additional functions
such as UGREENlink and Quick Login. You can choose to register a UGREEN Cloud account
and bind your device. If not, you can choose to skip this step and use only the local account to
log in to the device.
③ After completing the above operations, please check the update system option (required)
and the device analysis improvement plan option (not required), then you can start using the
device.
Note: If the device does not undergo the initialization process, its status will be displayed as
"Not Initialized".
Step 3: Set up Storage Mode
Enter the "UGREEN NAS" > "Storage Manager", then you can set up storage mode and configure
storage space.
14
Advertisement
Table of Contents
Need help?
Do you have a question about the NASync DXP4800 Plus and is the answer not in the manual?
Questions and answers
When away from my desktop and out of range of my WIFI, how do I reconnect my mobile device to my UGreen DXP4800 Plus Server? Can I access it via Cellular instead of WIFI? All my devices work great under the control of my WIFI but when I'm remote I can't get access using my mobile device...
You can reconnect your mobile device to the UGREEN NASync DXP4800 Plus server remotely by enabling remote access. The NAS provides remote access to files from anywhere in the world. To do this, go to the control panel, navigate to device connection settings, and enable remote access.
Yes, you can access the NAS via cellular data instead of Wi-Fi, as long as remote access is enabled and the NAS is connected to the internet. However, enabling remote access comes with security risks, so proceed with caution.
This answer is automatically generated
I notice there are two Modes - Mode 1 UGreenlink remote access (It is checked)... Do I need Mode 2 to be enabled? And if so, how do I configure it?
How can I set up local access on my DXP4800 Plus?