Getting To Know Your Camera; Inserting New Batteries - LEXIBOOK DIGITAL CAMERA User Manual

GETTING TO KNOW YOUR CAMERA

Please refer to images A & B located at the back of the cover page.
1. USB socket cover 2. LCD display 3. delete button 4. HI/LO/ button
5. Strap mount 6. Shutter button 7. Viewfinder 8. Brace hole 9. Battery
compartment

INSERTING NEW BATTERIES

Please refer to image C located at the back of the cover page.
1. Make sure the camera is off.
2. Open the battery compartment by sliding the cover off.
3. Note the polarity of the batteries (+/- signs) inside of the battery compartment.
4. Insert 2 new AAA batteries. Replace and close the battery cover by sliding it into
place.
Warning: If the unit malfunctions or receives an electrostatic shock, remove the
battery and insert it again. Important note: all files will be lost when replacing the
batteries. Make sure you transfer the files to your PC before changing the batteries.
INSTALLING THE CAMERA DRIVER AND SOFTWARE
Follow these instructions to install the camera driver and application software on
your PC system.
1. Insert the CD Software (included) in your CD-ROM drive. The CD will auto run,
and the following installation menu will appear:
Click on "Install driver", and then follow the instructions to install it. You will need to
reboot your computer after the driver installation.

DJ010series IM.indd 9 13/02/2007 18:41:38