Advertisement
Quick Links
The following instructions are provided to help you install the Service and Prep Top, Asado, 30" Grill, Sonoma Smoker
or Napoli Pizza Oven on the LMKC54.
IMPORTANT: Be sure the LMKC54's casters are locked to avoid movement when installing the prep top.
Warning: the LPZA is approximately 254lbs., the L30AG is approximately 208lbs., the LSMK is approximately 135 lbs.,
and the L30PSR is approximately 241 lbs. you will require assistance to lift and install any of these items onto the cart.
Tools required: Rags, newspaper (to place any items on), Philips head screwdriver, and gloves.
LServe
L30AG
Installing the Service and Prep Top, Asado, 30" Grill, Sonoma Smoker, or Napoli Pizza Oven on
L30PSR
1
LSERVE, LPZA, L30AG, LSMK and L30(PS)R
LPZA
LSMK
an LMKC54
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Lynx LSERVE
Summary of Contents for Lynx LSERVE
- Page 1 Installing the Service and Prep Top, Asado, 30” Grill, Sonoma Smoker, or Napoli Pizza Oven on an LMKC54 LSERVE, LPZA, L30AG, LSMK and L30(PS)R The following instructions are provided to help you install the Service and Prep Top, Asado, 30” Grill, Sonoma Smoker or Napoli Pizza Oven on the LMKC54.
- Page 2 LServe Remove the four screws on the back panel. Slide out drawer or remove completely to begin installation. Align countertop at an angle, and install as shown with the front engaged first. Hook the left tab inside the front frame.
- Page 3 LPZA Remove the four screws on the back panel. Slide out drawer or remove completely to begin installation. Remove the cooking deck by sliding it forward and carefully lifting the deck out of the oven. Remove all of the rubber feet off the base (only two shown in illustration).
- Page 4 L30AG Remove the four screws on the back panel. Slide out drawer and remove completely to begin installation. Carefully lift the Asado Grill and position it above the cart. Place the Asado Grill inside the cart frame. Re-attach the rear panel with the previously removed screws.
- Page 5 L30PSR Remove the four screws on the back panel. Slide out drawer or remove completely to begin installation. Carefully lift the 30” Grill and position it above the cart. Place the grill inside the cart frame. Re-attach the rear panel with the previously removed screws. Once the grill has been placed inside the cart.
- Page 6 LSMK Remove the four screws on the back panel. Slide out drawer or remove completely to begin installation. Carefully lift the Sonoma Smoker and position it above the cart. Place the smoker inside the cart frame. Re-attach the rear panel with the previously removed screws. Once the grill has been placed inside the cart.
- Page 7 ADJUST DRAWERS If drawer adjustment is needed, follow these steps: 24" Drawer Pull drawer out. Locate screws in center as shown below. Loosen screws - Do Not remove screws. Adjust door and re-tighten screws 30" Drawer Pull drawer out. Locate screws on each end as shown below. Loosen screws - Do Not remove screws.
- Page 8 Lynx Professional Grills 62201 Hwy 82 West Greenwood, MS 38930 888-289-5969 www.lynxgrills.com PN 36897 REV A 6/2024...
Need help?
Do you have a question about the LSERVE and is the answer not in the manual?
Questions and answers