Changing Handsfree Answerback For A Telephone - Norstar PLUS Compact ICS 2.0 System Coordinator Manual

•
• •
•
•
• •
•
•
•
•
•
•
•
• •
• •
•
Answering calls
I
43
3. Press
!show
I
and enter the internal number of the telephone
you wish to program .
4. Press
._ ls_ h o_ w _
__,I
twice .
5. Press
INex1
Jthree times.
6. Choose a setting at
Handsfree:
using the
CHRNGE
button.
There are three ways to set Handsfree for an individual telephone:
Handsfree is not available to the telephone .
You can make or answer a call without
having to pick up the receiver or press
I
H•i"J:•••
J. The telephone's internal
microphone and speaker turn on
automatically when you press a line or
intercom button to make or answer a call.
A standard version of Handsfree described
"Using Handsf ree/Mute" on page 40 .
For other displays, see " Common feature displays" on page 167.
Both Auto and standard Handsfree allow you to use a headset with
a Norstar telephone .
A Handsfree/Mute button is automatically assigned to a telephone
that is programmed with Handsfree and is always located in the
lower right-hand corner of the telephone .
Changing Handsfree Answerback for a telephone
Handsfree Answerback allows you to answer a voice call without
lifting the receiver. It is always turned off for an M7100 telephone .
You can turn Handsfree Answerback on or off fora telephone that is
programmed to use Handsfree.
You will need the programming template found at the front of this
guide. See Getting Started for more information .
1. Press
!Feature
J
EJ EJ []
~ ~
[] EJ EJ .
Compact ICS 2.0 System Coordinator Guide