Norstar PLUS Compact ICS 2.0 System Coordinator Manual page 17

•
•
•
•
• •
•
Getting started with Norstar / 5
The M7324 is different from the M7310 in two ways: it does not have
dual memory buttons (item 5) or a shift button (item 6) .
Using the buttons under the display
I
The three display buttons are used both for telephone features and
programming, but what each button does depends on what the display
shows. Some display instructions that you may see when making
changes on the system are OK, CHl=INGE or COPY. In this guide, display
button instructions are underlined.
Display buttons
• The programming overlay
e
I
When you begin programming, a group of buttons on the telephone
become the buttons for moving through programming headings and
settings. The programming overlay is a paper cutout (found at the tront
of this guide) that shows the directions the four buttons will take you
e
when programming .
•
•
•
•
Compact ICS 2 0 System Coord1nat0< Guide