Norstar PLUS Compact ICS 2.0 System Coordinator Manual page 150

138 /Using System features
• Manual allows you to turn the service on and off at any time from
a control telephone using a feature code.
• Automatic allows you to use the preassigned stop and start time
for a service. You are still able to start and stop the service by
entering the appropriate feature code at a control telephone. If
you select this setting, you will use the start and stop times
programmed by your installer or customer service
representative.
• Off prevents the service from being activated.
You will need the programming template found at the front of this
guide. See Getting Started for more information.
1. Press
!Feature
I
El El [] [] [] [] []
EJ.
2. Press [] [] [] [] [] (the default System Coordinator
password) .
3. Press
c..: IN=ex.:._1 _
_,! twice.
4. Press
lshow
I
at
Services.
5. Press
!Next
I
until you see the Service you want to program.
6. Press
!show
I
and
INext
I
until you see the schedule you
want to program.
7. Press
lshow
I
and use
DiRNGE
to select the setting that will
work best for your office: Off, Manual or Automatic.
Each schedule can have its own configuration of a Service which
works independently of automatic start and stop times. For example,
there may be a version of Restriction service called Night Schedule
that prevents anyone from making long distance calls. But calling it
Night Schedule does not mean it can only be used with a schedule.
You can turn the Night Schedule for Restriction Service on or off as
needed any time of the day or night. If you decide to run a service
on a schedule, the system will use the start and stop times used for
that schedule.
Compact
ICS 2 0 System Coo<dJ11ator Gulde
•
•
• •
• •
•
•
•
• •
•
•
•
• •