Norstar PLUS Compact ICS 2.0 System Coordinator Manual page 175

• •
•
• Using the alarm telephone
An alarm telephone displays Norstar's system alarm codes, should
e
they
occur.
It is a Norstar telephone with a two-line display (M731 O
or M7324 telephones) that the installer or customer service
• representative has assigned as an alarm telephone.
•
• •
•
• •
•
• •
Reporting and recording alarm codes
If an alarm message appears on the alarm telephone's display
• record the alarm number
• press Til'E and
record
the time displayed
• call
your installer or customer service representative and report
the alarm
code
• after speaking to your installer or customer service
representative, press a..a:IR
Report this alarm and the time it occurred to
your installer or customer service
representati ve .
Testing the telephone
If you suspect something is wrong with a button, the speaker, the
displays, or some other part of the Norstar telephone hardware, you
can
do a quick test to see which part of the telephone is broken .
Tip -
Ensure that the function of a button
matches its label by pressing
!Feature
I~@]
and
then the button to see i ts function.
You can end the telephone testing session anytime
by pressing
~
or
!Feature
I
unless you are
testing those buttons. The test feature will time-out
after 30 minutes of no a ctivity .
Compact ICS 2 0 System Coordinator G uide