Advertisement
Quick Links
Spice Rack
Wood
Screws
Extra
screws
for front
(optional)
8" spice rack
shown
Select Install Option
Option
Option
Option
1
Mount to back of cabinet
a.
Place base against
back of cabinet
Check hinge clearance
Adjust if needed
Base
c.
Pre-drill 3/32" dia.
Optional front
screw locations
2
Adjust glide rails forward to align drawer at front of cabinet
a.
Measure
Distance
From front of Rack to
Front of Cabinet
c.
Slightly
Loosen
4 Screws
e.
Tighten
4 Screws
Pencil
3/32" Drill Bit
Power Drill
Phillips Screwdriver
Tape Measure
A
If cabinet depth is 12.5" or less
- or -
B
If cabinet depth is more than 12.5"
Mount to back of cabinet
A
(If cabinet depth is 12.5" or less)
Back of
Cabinet
Clearance
Optional Screws
Rack
b.
d.
Install 2 screws
Slide rack forward
Install 2 screws
b.
Slide rack forward
Front
of cabinet
d.
Adjust Glide Rails
same distance as
measured (step a)
Adjusts up to 2"
f.
Aligned at
front of cabinet
Check closed
door clearance
Adjust if needed
For video showing
ProGlide
Plus 2™,
®
scan below!
Rack
Rack
Bracket
Page 1
Advertisement
Related Manuals for Lynk ProGLide PLUS 2 430621DS
Summary of Contents for Lynk ProGLide PLUS 2 430621DS
- Page 1 Spice Rack For video showing Wood Pencil Screws ProGlide Plus 2™, ® 3/32” Drill Bit scan below! Power Drill Extra screws Phillips Screwdriver for front (optional) 8” spice rack Tape Measure shown Select Install Option Option If cabinet depth is 12.5" or less - or - Option If cabinet depth is more than 12.5"...
- Page 2 LIFETIME LIMITED WARRANTY AND DISCLAIMER OF LIABILITY Lynk® will, for the life of the product, at its option, repair or replace, free of charge, any part of the equipment that is defective in material or workmanship or both, providing that installation and use of the equipment complies with the instructions in the instruction manual.
Need help?
Do you have a question about the ProGLide PLUS 2 430621DS and is the answer not in the manual?
Questions and answers