This section explains how to record from the tuner, CD player, or
Use Type I (normal) tapes only.
Set the tape to the point where recording will start.
Note that recording is done only one side of the tape.
Insert the tape to be recorded on into deck 2.
Insert the tape with the side to be recorded on first facing
out from the unit.
2 Press one of the function buttons and prepare
the source to be recorded.
To record from a CD, press the CD button and load the
To record from a radio broadcast, "press the TUNER button
and tune in to a station.
To record from the connected
source, press the VIDEO/
AUX button and play.
3 Press the
MUTE button to start
When the selected function is CD, playback and recording
To stop recording, press the
To pause recording,
press the II button. (Applicable when the
source is TUNER or VIDEO/AUX)
To resume recording, press
INSERTING BLANK SPACES
4-second blank spaces can be insertedat the desired pointduring
recording. (Applicable when the source is TUNER or VIDEO/
1 Press the
REC/REC MUTE button during recording or
while in recording pause mode.
on the display flashes for 4 seconds and the tape runs
without recording. After 4 seconds; the deck enters the
recording pause mode.
2 Press the II button to resume recording;
To insert a blank epace of less than 4 seconds, press the".
REC/REC MUT.E button again while ~
To insert blank spaces of more than 4 seconds, after the
deck enters recording pause mode, press the
MUTE button again. Each time the button is pressed, a 4-second
blank space is added.
To erase a recording
Make sure the microphone is not connected to this unit.
Insert the tape to be erased into deck 2 and press the TAPE/
DECK 1/2 button to display "TP 2.
2 Set the tape to the point where the erasure is to be started.
3 Press the
REC/REC MUTE button to start the erasure.