Entrust nShield Connect 6000 Hardware And Setup Manual page 22

Chapter 3. nShield PCIe HSMs
If the Security World software has not already been installed, you must install the
Security World Software by following the instructions in the
World Software v13.6.3 Installation
Although methods of installation vary from platform to platform, the Security
World Software should automatically detect the module on your computer and
install the drivers. You do not have to restart the system.
nShield 5s only
If this is not the first HSM installed in this host, the Security
World software is already installed and you can skip the
instructions in the nShield Security World Software v13.6.3
Installation Guide. However, you still need to set up
communication between the host and the newly installed

module. The module must either be in factory state or have been
previously prepared for use on this host. For more information,
see Set up communication between host and module in the User
Guide for your module and operating system.
If the new module has been supplied from the factory it will
already be in factory state.
nShield v13.6.3 Hardware Install and Setup Guides
Guide.
nShield Security
19/25