Comfee CVU30W2AST Installation

Hide thumbs Also See for CVU30W2AST:

Download this manual

Install the Hood:

If present, remove all protective polyfilm from the hood and/or parts.

This product can be installed in two different ways (Wall-mounted and

Top-mounted ) . Below picture shows the 1:1 hole drawing of different installation

methods.

18''

9.07''

1.67''

5.58''

3.88''

Wall-mounted

Step 2 assemble the 7'' adapter to the top of the whole machine

step 1 Install front baffle

27.8"

9.45"

8.86''

4.72''

15"

30''

step 1

use screws fixed

Installation

6.93''

24.44''

Knock open (wire outlet)

step 2 assemble the 7'' adapter to the

top of the whole machine

Use six

screws (0.16"*0.31")

for fixed

Need help?

Do you have a question about the CVU30W2AST and is the answer not in the manual?

Page 1 Installation Install the Hood: If present, remove all protective polyfilm from the hood and/or parts. This product can be installed in two different ways (Wall-mounted and Top-mounted ) . Below picture shows the 1:1 hole drawing of different installation methods. 27.8"...
Page 2 Installation 1. Disconnect power. A. White wires B. Black wires C. Green ground wire D. UL listed wire connector E. Home power supply cable F. UL listed or CSA approved 0.5” strain relief 2. Use UL listed wire connectors and connect white wires (A) together.
Page 3 Installation 4) Lock the lower two ho * " " " 5 Top mounted : According to the 1:1 hole drawing of top mounted, mark the following position swith pencil under the cabinet, and use the drilling tool to open the air pipehole power cord hole in turn.
Page 4 Installation 3) Install the air outlet assembly on the circular air outlet at the back of the cook hood; Align the air ventilation port of the cook hood with the cabinet ventilationhole at the bottom, pass the power cord through the power hole, and thenuse four 0.2*0.75’’...