Recording From Audio Components - Pioneer VSX-D709S Operating Instructions Manual

Recording from Audio Components

The following explanations show you how to record an analog or digital audio signal. Note that your analog
components cannot record a player that is only connected digitally (and vice-versa). If you want to record from a
digital component to an analog one (for example, a tape deck), or vice-versa, the digital component it must be
connected via analog jacks and you need to set the SIGNAL SELECT switch to ANALOG. To make exact digital
copies (of digital sources like CDs) both the source component and the recorder must be connected with digital
connections. See p.12 for more on analog audio connections and p.13 for digital audio connections.
The receiver's volume, channel level, balance, TONE, DIGITAL NR, MIDNIGHT, LOUDNESS and sur-
memo
round effects have no effect on the recorded signal and the MULTI CHANNEL IN cannot be recorded.
In some cases, digital recordings have copy guard protections and making a digital copy is not possible.
In this case you can only copy them in an analog manner.
SOURCE RECEIVER
VCR VCR
DVD
TV
1 2
MULTI CONTROL
CD CD-R TUN TVC
1 2 3
LOUDNESS VIDEO SELECT MULTI CH INPUT
4 5 6
INPUT ATT DIGITAL NR FL DIMMER
7 8 9
REMOTE SETUP SYSTEM SETUP SIGNAL SELECT
+10 DISC
0
ENTER
EFFECT/CH SEL
2
RECEIVER
TV
TV VOL MASTER VOLUME
TV CONTROL
TVFUNK
4 ¢
CHANNEL
TUNE
ST ST
ENTER
TUNE
GUIDE MENU
D.ACCESS BAND CLASS
& ‹ *
MPX DTV ON / OFF DTV MENU
¶ ! ⁄
RETURN S.MODE CLEAR DTV INFO
RDM
RECEIVER DIRECT CONTROL
MIDNIGHT DSP STEREO FUNCTION
ADVANCED STANDARD MUTE
2
Î
/ DTS
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
1 Select the source component.
1
2 Press RECEIVER.
This switches the remote to the receiver control mode.
3 Set SIGNAL SELECT according to the source
3
component's signal (ANALOG or DIGITAL).
Press the SIGNAL SELECT button on the remote control (or
use the button on the front panel) and choose ANALOG.
4 Start recording with a recorder.
5 Playback the source to be recorded.
Record monitor (TAPE 2 MONITOR)
If you connect a cassette deck with a record monitor function to the
TAPE 2 MONITOR jacks, you can listen to the sound of an analog
recording as it is being recorded.
Press TAPE 2 MONITOR to switch between the sound of the
recording (TAPE 2 indicator on) and the sound of the source
component (TAPE 2 indicator off).
TAPE 2 MONITOR
VSX-D709S
Using Other Functions
67