Page 1
17/07/2024 19:22 Jabra GN9120 DECT GAP How to connect my Jabra GN9120 EHS / GN9125 EHS with Siemens OptiPoint 410, 420, 500, 600 Prerequisites: GN 9120 EHS + acoustic adapter (only available from Siemens) GN 9125 EHS + acoustic adapter (only available from Siemens)
Page 2
"headset" symbol on the Optipoint acoustic adapter. 2. Plug the split end of the DHSG cable into the base on the Jabra GN9120. Plug the RJ10 plug into the socket with the complete "phone" symbol and the RJ45 plug into the socket on the Jabra GN9120 base marked with "AUX".
Page 3
5. To confirm the EHS has successfully installed, the phone automatically switches back to charge mode after approx. 15 seconds. Base setup: The set-up switch (small wheel) on the base must be set to “A”. https://www.jabra.ie/supportpages/jabra-gn9120/9120-49-21/faq/700c04e5-ac46- Page 3 of 4 486c-9257-207952d17dec...
Page 4
OptiPoint so that the EHS function is accepted. An optional headset button can be set up via the phone menu (combination: *91 >Select button > Change button > Headset > OK). https://www.jabra.ie/supportpages/jabra-gn9120/9120-49-21/faq/700c04e5-ac46- Page 4 of 4 486c-9257-207952d17dec...
Need help?
Do you have a question about the GN9125 EHS and is the answer not in the manual?
Questions and answers