Advanced Setup; Speaker Setup - Onkyo TXNR905B Instruction Manual

Advanced Setup

Speaker Setup

This section explains items on the Speaker Setup menu.
Some of the speaker settings are set automatically by the
Automatic Speaker Setup function (see page 61).
DIMMER
ENTER
ALBUM
SETUP
PREV
CH
DISPLAY
Speaker Settings
See "Speaker Settings" on page 51.
Speaker Configuration
These settings are set automatically by the Automatic
Speaker Setup function (see page 61).
With the Speaker Configuration settings, you can specify
which speakers are connected and a crossover frequency,
distance, and level for each speaker.
You can choose which of the speakers you want to use
with the Speakers A and Speakers B configurations, and
set the crossover frequencies, distances, and levels of the
front Speakers A and front Speakers B independently.
The other speakers (i.e., subwoofer, center, surround,
and surround back) use the same crossover frequencies,
distances, and levels for Speakers A and Speakers B.
The following crossover frequencies can be specified:
Full Band, 40 Hz, 50 Hz, 60 Hz, 70 Hz, 80 Hz (THX),
90 Hz, 100 Hz, 110 Hz, 120 Hz, 130 Hz, 150 Hz, or
200 Hz.
Specify Full Band for speakers that can output low-fre-
quency bass sounds adequately, for example, speakers
with a good sized woofer. For smaller speakers, specify
a crossover frequency. Sounds below the crossover fre-
quency will then be output by the subwoofer instead of
the speaker. Refer to your speakers' manuals to deter-
mine the optimum crossover frequencies.
If you're using THX-certified speakers, specify
80 Hz (THX) for all speakers.
94
INPUT SELECTOR
MACRO
1 2 3 ZONE 3
REMOTE MODE
DVD VCR CD 2
ZONE
CDR/MD/DOCK
RECEIVER
TV CABLE NET/USB RECEIVER
SAT TAPE/AMP
SLEEP
+
CH
VOL
ENTER
DISC
-
MUTING
REC RANDOM
PLAYLIST
SP A SP B
LISTENING MODE
1
Press the [RECEIVER] REMOTE
MODE button, and then use the
RECEIVER
remote controller's [SP A] or
[SP B] button to select Speakers
A or Speakers B, respectively.
Note:
• Speakers B cannot be selected if
Speaker Type Front B is set to Not
SP A SP B
Use.
2
Press the [SETUP] button.
The main menu appears onscreen.
3
Use the Up and Down [
buttons to select "2. Speaker
Setup," and then press [ENTER].
ENTER
The Speaker Setup menu appears.
2.Speaker Setup
1.Speaker Settings
2.Speaker Config
3.Speaker Distance
4.Level Calibration
ENTER
5.Equalizer Settings
6.THX Audio Setup
4
Use the Up and Down [
buttons to select "2. Speaker
Config," and then press [ENTER].
ENTER
The Speaker Config screen appears.
2-2.Speaker Config
Subwoofer
Front
Center
ENTER
Surround
Surr Back
Surr Back Ch
LPF of LFE
Double Bass
]/[ ]
]/[ ]
Speakers A
Yes
Full Band
100Hz
100Hz
100Hz
2ch
120Hz
On