EcoFlow DELTA Pro 3 Manual page 9

On: Output Port Memory is enabled. When the power station is
turned off, undergoes a firmware upgrade, or reaches the
discharging level, it stores the current output state before it
powers down. Upon being turned on, completing the firmware
Output Port
5 upgrade, or exceeding the discharging level, it automatically
Memory
restores all outputs.
Note:
port is automatically turned off due to its standby time or if it is
manually turned off by pressing its corresponding control button.
Blinking:
High
and place the power station in a location away from heat sources
6 Temperature
with good ventilation. The alarm will disappear once the power
Warning
station temperature returns to normal operating levels.
Battery Blinking:
7
Error instructions for troubleshooting.
Remaining
Charging /
8 On: Displays the remaining charging or discharging time.
Discharging
time
On: An error has occurred. Check the EcoFlow in-app instructions
9 Error Code
for troubleshooting.
Blinking:
Low
station to a warmer location to ensure usage within the appropriate
10 Temperature
temperature range. The warning will disappear once the power
Warning
station temperature returns to normal operating levels.
On: The ventilation fan is running.
11 Fan Status
Blinking:
On: The automatic start / stop of the connected generator has
Generator
been set up in the EcoFlow app. This feature is only applicable to
12 Auto On /
an EcoFlow Smart Generator connected to this power station via
Off
the Extra Battery port.
Adjustable
On: Charge Speed Switch is set to ADJUST. The power station will
13 Charging
be charged at the customized speed defined in the EcoFlow app.
Speed
Charging / On: The charge limit or discharge limit is set in the EcoFlow app.
14 Discharging Blinking:
Limit DC outputs cannot be enabled.
Blinking:
Overload devices from the power station to decrease the overall power
15
Warning output. The warning will disappear once the power output returns
to its usual level.
16 Output Icon On: Displays power output details.
17 Frequency On: Displays operating power frequency
Total Output
18 On: Displays total output power.
Power
AC Output On: The AC output sockets are enabled.
The power station will not restore an output if that output
High temperature protection is triggered. Stop operation
An error has occurred. Check the EcoFlow in-app
Low temperature protection is triggered. Move the power
Abnormal fan status.
The discharge limit is reached. The AC outputs and 12V
Overload protection is triggered. Disconnect some