Subscribe to Our Youtube Channel
Related Manuals for DeerValley DV-1S0150
Summary of Contents for DeerValley DV-1S0150
- Page 1 Installation and Owner’s Manual Smart Toilet (DV-1S0150) NOTE: Drawings may not exactly define contour of the product. www.deervalleybath.com | (+1) 312-626-9466 | service@ deervalleybath.com...
- Page 2 (+1) 312-626-9466 service@deervalleybath.com...
-
Page 3: Table Of Contents
Important Safeguards Explanation of Terms and Symbols Warnings & Attention Product Installation Tools needed Parts included Parts Diagram Smart Toilet Overview Remote Control Precautions Before Installation Install the Smart Toilet Install the Remote Control Test Before Use Remote Control Operation Knob and Other Operation Battery Backup Installation Specifications... -
Page 4: Important Safeguards
Grounding pin WARNING: Risk of electric shock. Connect the unit only to a circuit protected by a ground-fault circuit-interrupter (GFCI). AA200 NOTE: Installation of the DeerValley Smart Toilet may require specialized tools. Plumbing components are not included. (+1) 312-626-9466 www.deervalleybath.com... -
Page 5: Explanation Of Terms And Symbols
Installation and Owner’s Manual 2. Explanation of Terms and Symbols Thank you for purchasing our product. Please read this User Manual before installation and use and save it for future reference. The hazards and warnings listed herein are important to our users' safety. Significant consequences may result from failure to heed warnings. -
Page 6: Warnings & Attention
Installation and Owner’s Manual 3. WARNING & Attention WARNING This product needs to be properly grounded. Risk of electric shock. If unsure, contact an electrician. Do not place a lit cigarette along with other burning objects into the unit. Risk of fire. Do not touch, insert or pull out the power plug with a wet hand. - Page 7 Installation and Owner’s Manual WARNING Regularly unplug the unit from power and wipe off any dust on the plug using a dry cloth. Risk of fire. Young children, the aged and the physically disabled should be given supervision by a person responsible for their safety while using the unit. Otherwise, prolonged use may cause low temperature burns.
- Page 8 Installation and Owner’s Manual WARNING Do not disassemble, repair or alter this product on your own. Call in a professional or contact service center for future advise. Risk of fire, electric shock, and/or other accident that may lead to injury. Do not use industrial or polluted water.
- Page 9 Installation and Owner’s Manual BATTERY WARNING Read the following for proper battery usage: so may result in interrupted signals. leakage that may cause fire and / or other damages. If battery is swallowed, contact a doctor immediately. Do not do the following with the batteries: Battery fluids may cause a fire.
- Page 10 Installation and Owner’s Manual ATTENTION To avoid danger from false reset of the thermal breaker, do not supply power through an external switching device, such as a timer, or connect to a circuit that is periodically turned on and off by a general-purpose component.
- Page 11 Installation and Owner’s Manual ATTENTION Unplug the unit when the product is in disuse for a long time. Make sure to shut off the water supply and drain the water inside the product. Risk of fire, leakage and product damage. Do not use old hose to connect to unit.
-
Page 12: Product Installation
Installation and Owner’s Manual 4. Product Installation (1) Tools needed Drill (with 6mm Bit) Raw Tape Utility Knife Marker 23-26mm (Adjustable Wrench) Screwdriver Tape Measure Measuring Cup (2) Parts included Smart Toilet T-Valve Wax Ring Remote Control Assembly Operating Instruction Connector and Other Prints Floor Bolts... -
Page 13: Parts Diagram
Installation and Owner’s Manual 3. Parts Diagram (1) Smart toilet overall view Safety Instruction Cover Power Plug Dryer Nozzle Knob (Rear Wash and Front Wash) Seat Sensor Toilet Water Supply Hose Heated Seat Tee valve Toilet Water Supply Angle Valve Foot Touch Intelligent Toilet Water Supply Hose... -
Page 14: Remote Control
Installation and Owner’s Manual (2) Remote Control Night Light Hot/Cold Alternates between On/off of night light hot and cold water for washing Nozzle Clean Key for nozzle clean Bidet Bidet For female washing Dryer Drying off the washed area Flush Flushing the toilet Water Temp. -
Page 15: Precautions Before Installation
Installation and Owner’s Manual (3) Precautions before Installation Water Pressure Requirements The minimum dynamic operating water pressure is 25 Psi, and the maximum static water pressure is 80 Psi. 16.65" 16" Rough-in 12" NOTE: Drawings may not exactly define contour of the product. (+1) 312-626-9466 -13- www.deervalleybath.com... -
Page 16: Install The Smart Toilet
Installation and Owner’s Manual 4. Install the Smart Toilet (1) Draw a cross marker on the drain outlet on the ground. Clean the floor and wipe off any excess dust or dirt . Failure to install on an cleaned surface will affect the quality of installation. - Page 17 Installation and Owner’s Manual (4) Install the wax ring and brass floor bolts onto floor flange. Insert the 2 brass floor bolts flat head thru the appropriate slot in the floor flange. Use the provided plastic floor bolt washer to secure the floor bolts on the floor flange. Brass bolts should remain vertical FIGURE 5A.
- Page 18 Installation and Owner’s Manual (7) Connecting the tee valve to shut off valve and connecting braided water supply hoses. adapter (supplied). FIGURE 9B FIGURE 9A Connect braided supply tubes to tee valve male connections. - 1/2" seat water supply hose to bottom of tee valve - 1/2"...
- Page 19 Installation and Owner’s Manual (9) Connect the power supply. Connect the ground wire. Power plug into the AC 120V socket. Confirm whether the power is connected. Note: Check the power plug indicator light. An illuminated power indicator confirms that the smart toilet is on. Once powered on, press and hold the knob for 3 seconds to enter standby mode.
-
Page 20: Install The Remote Control
Installation and Owner’s Manual 5. Install the Remote Control (1) Install the Remote Control 1. According to the location of the screw holes of the remote control holder, drill two holes with a 6mm-diameter drill bit on the wall with a depth greater than 45mm. 2. -
Page 21: Test Before Use
Installation and Owner’s Manual (2) Test before use Test run (test all function buttons on the remote control and the knob on toilet body.) ● Verify the normal operation of each product function. Confirm the functionality of rear wash, front wash (including spray strength adjustment and nozzle position adjustment), dryer, air temperature, water temperature, seat temperature, and nozzle clean. -
Page 22: Remote Control Operation
Installation and Owner’s Manual 6. Remote Control Operation The product incorporates a seat sensor. If the user is not seated properly, the rear wash, front wash, and dryer functions will not be operable. Bidet Press "Bidet" key. The water flow for washing is directed from the front end of the nozzle, providing a cleansing motion for the intimate areas of females. - Page 23 Installation and Owner’s Manual Hot/Cold Press "Hot/Cold" key, and Hot/Cold function will be enabled or disabled. In wash mode, press the Hot/Cold key to alternate between cold and warm water wash. This function is exclusively available during wash mode. Bidet Dryer Press "Dryer"...
- Page 24 Installation and Owner’s Manual 《 Water Temp. Press "Water Temp." key to adjust water temperature for wash. Current temperature level will be displayed when the key is pressed for the first time. When it is pressed again, temperature level will be switched, and proper temperature can Bidet be set.
- Page 25 Installation and Owner’s Manual 《 Nozzle Clean Press "Nozzle Clean" key. ●The cleaner protrudes for manual wash. This function is only available when the human body or other objects do not contact the seat Bidet ring sensing area. ●While the human body is seated, press the "Nozzle Clean"...
-
Page 26: Knob And Other Operation
Installation and Owner’s Manual 7. Knob and other operation Posterior Bidet Powered on and seated, with front wash, Powered on and seated, with front wash, reash wash and dryer functions off. reash wash and dryer functions off. Turn the knob counterclockwise for auto front Turn the knob clockwise for auto rear wash wash with default oscillating function. - Page 27 Installation and Owner’s Manual Deodorization The function will operate automatically. Deodorizing fan automatically turns on after seating and turns off 3 minutes after leaving the seat. Auto flush Human body leaves the seat sensor area after seating. When the human body leaves the seat after seating, it will automatically flush once.
-
Page 28: Battery Backup Installation
Installation and Owner’s Manual 8. Battery Backup Installation ●Take out the battery box by prying open the clasp on both sides with a screwdriver and removing the battery box cover. ●Align the positive and negative terminals of the battery with those inside the battery box, then install it into the battery box base. -
Page 29: Specifications
Installation and Owner’s Manual 9. Specifications (1) Product specifications Power rating 110V Frequency 60Hz Rated power input 1050W(When inlet water temp in 15 ) Seat and dryer temperature range 39.4 °F~104 °F Source water temperature range 39.4 °F~95 °F Water supply type DN15(G1/2") Minimum pressure 25psi , ensuring a flow of water at least 18L/min... - Page 30 Installation and Owner’s Manual (2) Function Table Function Category Posterior (Rear cleaning) Bidet (Front cleaning) Instant heating Oscillating cleaning Cleansing Hot & cold massage cleaning Water pressure adjustment Water temperature adjustment Nozzle position adjustment Self-cleaning nozzle Antibacterial nozzle & seat cover Instant heating Seat heating Seat ring temperature adjustment...
- Page 31 Installation and Owner’s Manual (3) Regular maintenance Regular maintenance is required to ensure normal use Cut off the power and water supply before maintenance. Direct water wash to the entire product is prohibited. WARNING Do not spray water or During winter season, the water inside may freeze detergents on the toilet, after long periods of storage and non-usage.
- Page 32 Installation and Owner’s Manual (4) Problems & Solutions Problems Causes Problems Causes Check whether the water supply cuts off or not Check whether the angle valve switches off or not Check whether the water filter is blocked or not Check whether the inlet pipe is flexed or not Check whether the water pressure of cleaning switch to low level or not...
- Page 33 Installation and Owner’s Manual Problems Causes Check whether the dryer switches off or not Check whether the heating element of dryer is damaged or not Problems Causes Check whether the temp of toilet seat is on the "off" position or not Problems Check whether there is any water on the remote control or not...
- Page 34 30 days from the date of delivery); or (3) issue a credit nance, alteration of the product, or failure to follow care or in- to be applied toward the purchase of a new DeerValley prod- stallation instructions enclosed with your product. This warranty...
Need help?
Do you have a question about the DV-1S0150 and is the answer not in the manual?
Questions and answers
Can you manually flush during a power outage
Yes, the DeerValley DV-1S0150 can be manually flushed during a power outage by long-pressing the side flush button.
This answer is automatically generated