Problems With Sound - Creative AWE64 - Value Sound Card Getting Started Manual

Problems with Sound

Problem
Causes
Solution
D-2 Troubleshooting
Alternatively, if you do not want to select the Auto
Insert Notification check box, perform the following
1. Double-click the My Computer icon on your
Windows 95 desktop.
2. In the My Computer window, right-click the
CD-ROM drive icon.
3. On the shortcut menu, click AutoPlay and follow
the instructions that appear.
No output from both the 8-bit and 16-bit digitized
sounds when running the test program.
1. The volume knob on the speakers is not set properly.
2. The external amplifier or speakers are connected to
the wrong jack.
3. The speaker amplifiers are in the On position.
If you are using powered speakers in a non-powered
state, turn off their amplifiers.
4. There is hardware conflict.
Verify the following:
Volume control knob of the speakers, if any, is set at
mid-range.
External amplifier or powered speakers are
connected to the card's Line Out jacks.
No hardware conflict between the card and another
peripheral device. For details, see "Resolving
Conflicts" on page D-5.
Amplifiers on speakers are in the Off position.